/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : compressor_valve_switch.h
  * @brief          : 压缩机、电磁阀、散热风扇控制头文件
	* @version        : 1.0
	* @changelog      : version 1.0 初始版本  2025.12.10
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2025 Yuwell Software Danyang.Jiangsu.China
  * THIS SOFTWARE is licensed under the Mulan PSL v1.
  * can use this software according to the terms and conditions of the Mulan PSL v1.
  * You may obtain a copy of Mulan PSL v1 at:
  * http://license.coscl.org.cn/MulanPSL
  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
  * PURPOSE.
  * See the Mulan PSL v1 for more details.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __COMPRESSOR_VALVE_SWITCH_H
#define __COMPRESSOR_VALVE_SWITCH_H

#ifdef __cplusplus
extern "C" {
#endif



#include <stdint.h>
#include "fm33lg0xx_fl.h"
#include "fm33lg0xx_queue.h"
#include "fm33lg0xx_event.h"

// 通过队列及事件组中内容 完成电磁阀、压缩机、风扇状态切换



// 硬件重映射
#define VALVE_1_GPIO_PORT             GPIOE
#define VALVE_1_GPIO_PIN              FL_GPIO_PIN_1

#define VALVE_2_GPIO_PORT             GPIOE
#define VALVE_2_GPIO_PIN              FL_GPIO_PIN_2

#define COMPRESSOR_GPIO_PORT          GPIOD
#define COMPRESSOR_GPIO_PIN           FL_GPIO_PIN_4

#define FAN_1_GPIO_PORT               GPIOE
#define FAN_1_GPIO_PIN                FL_GPIO_PIN_0

#define FAN_2_GPIO_PORT               GPIOB
#define FAN_2_GPIO_PIN                FL_GPIO_PIN_13

#define FAN_3_GPIO_PORT               GPIOB
#define FAN_3_GPIO_PIN                FL_GPIO_PIN_14





#define COMPRESSOR_ON                 FL_GPIO_SetOutputPin(COMPRESSOR_GPIO_PORT,COMPRESSOR_GPIO_PIN);
#define COMPRESSOR_OFF                FL_GPIO_ResetOutputPin(COMPRESSOR_GPIO_PORT,COMPRESSOR_GPIO_PIN);

#define VALVE_1_ON                    FL_GPIO_SetOutputPin(VALVE_1_GPIO_PORT,VALVE_1_GPIO_PIN);
#define VALVE_1_OFF                   FL_GPIO_ResetOutputPin(VALVE_1_GPIO_PORT,VALVE_1_GPIO_PIN);

#define VALVE_2_ON                    FL_GPIO_SetOutputPin(VALVE_2_GPIO_PORT,VALVE_2_GPIO_PIN);
#define VALVE_2_OFF                   FL_GPIO_ResetOutputPin(VALVE_2_GPIO_PORT,VALVE_2_GPIO_PIN);


#define FAN_1_ON                    FL_GPIO_SetOutputPin(FAN_1_GPIO_PORT,FAN_1_GPIO_PIN);
#define FAN_1_OFF                   FL_GPIO_ResetOutputPin(FAN_1_GPIO_PORT,FAN_1_GPIO_PIN);

#define FAN_2_ON                    FL_GPIO_SetOutputPin(FAN_2_GPIO_PORT,FAN_2_GPIO_PIN);
#define FAN_2_OFF                   FL_GPIO_ResetOutputPin(FAN_2_GPIO_PORT,FAN_2_GPIO_PIN);

#define FAN_3_ON                    FL_GPIO_SetOutputPin(FAN_3_GPIO_PORT,FAN_3_GPIO_PIN);
#define FAN_3_OFF                   FL_GPIO_ResetOutputPin(FAN_3_GPIO_PORT,FAN_3_GPIO_PIN);


#define FAN_ALL_ON                  FAN_1_ON;FAN_2_ON;FAN_3_ON;
#define FAN_ALL_OFF                 FAN_1_OFF;FAN_2_OFF;FAN_3_OFF;



void compressor_valve_init(void);    // 初始化压缩机、电磁阀、、风扇
void compressor_valve_task(void);    // 压缩机、电磁阀控制任务 20ms执行一次





#ifdef __cplusplus
}
#endif

#endif /* __COMPRESSOR_VALVE_SWITCH_H */

/************************ (C) COPYRIGHT Yuwell *****END OF FILE****/