/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : bs83b12_capacitive_touch.h
  * @brief          : 屏幕显示
	* @version        : 1.0
	* @changelog      : version 1.0 初始版本  2025.11.13
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2025 Yuwell Software Danyang.Jiangsu.China
  * THIS SOFTWARE is licensed under the Mulan PSL v1.
  * can use this software according to the terms and conditions of the Mulan PSL v1.
  * You may obtain a copy of Mulan PSL v1 at:
  * http://license.coscl.org.cn/MulanPSL
  * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR
  * PURPOSE.
  * See the Mulan PSL v1 for more details.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __BS83B12_CAPACITIVE_TOUCH_H
#define __BS83B12_CAPACITIVE_TOUCH_H

#ifdef __cplusplus
extern "C" {
#endif


#include <stdint.h>
#include "fm33lg0xx_fl.h"
#include "fm33lg0xx_queue.h"
#include "fm33lg0xx_event.h"


#define ALARM_YELLOW_GPIO_PORT          GPIOC
#define ALARM_YELLOW_GPIO_PIN           FL_GPIO_PIN_9


#define ALARM_YELLOW_ON                 FL_GPIO_SetOutputPin(ALARM_YELLOW_GPIO_PORT, ALARM_YELLOW_GPIO_PIN);
#define ALARM_YELLOW_OFF                FL_GPIO_ResetOutputPin(ALARM_YELLOW_GPIO_PORT, ALARM_YELLOW_GPIO_PIN);



/*********
1：iic 通讯
2：地址 0xA0

3：从机发送3个字节 
	 byte0:	键值
	 byte1: 固定0x00
	 byte2:	~(byte0+byte1) + 1
	 
5：主机发送
	byte0:	bit0 = 1
	 	bit1/bit2=11/00(背光指示灯亮/灭)
	 	bit4=1/0(蜂鸣器响/灭)
	 	bit6=1/0(蓝灯指示灯亮/灭)  
	 	bit7(绿灯指示灯亮灭) 
	 byte1:	 ~(byte0)+1
*********/
#define BS83B12_ADDR                     0xA0  // 每隔100ms从该地址读取按键数据

#define BS83B12_SCL_GPIO_GROUP           GPIOC
#define BS83B12_SCL_GPIO_PIN             FL_GPIO_PIN_7
#define BS83B12_SDA_GPIO_GROUP           GPIOC
#define BS83B12_SDA_GPIO_PIN             FL_GPIO_PIN_8

#define BS83B12_SDA_CLEAR()              FL_GPIO_ResetOutputPin(BS83B12_SDA_GPIO_GROUP,BS83B12_SDA_GPIO_PIN);
#define BS83B12_SDA_SET()                FL_GPIO_SetOutputPin(BS83B12_SDA_GPIO_GROUP,BS83B12_SDA_GPIO_PIN);

#define BS83B12_SCL_CLEAR()              FL_GPIO_ResetOutputPin(BS83B12_SCL_GPIO_GROUP,BS83B12_SCL_GPIO_PIN); 
#define BS83B12_SCL_SET()                FL_GPIO_SetOutputPin(BS83B12_SCL_GPIO_GROUP,BS83B12_SCL_GPIO_PIN);

#define BS83B12_BACK_LIGHT_ON_BYTE0       0x07
#define BS83B12_BACK_LIGHT_ON_BYTE1       0xF9

#define BS83B12_BACK_LIGHT_OFF_BYTE0      0x01
#define BS83B12_BACK_LIGHT_OFF_BYTE1      0xFF


// 定义触摸三个按键的键值
#define BS83B12_KEY1_CODE                 0xFB
#define BS83B12_KEY2_CODE                 0xFD
#define BS83B12_KEY3_CODE                 0xFE
#define BS83B12_KEY_NONE                  0xFF

#define KEY121_TIMEOUT_TICKS              (20)


void bs83b12_capacitive_touch_init(void);    // 初始化触摸按键及部分灯


void bs83b12_touch_read_task(void);          // 每隔100ms执行一次，读取按键状态



#ifdef __cplusplus
}
#endif

#endif /* __BS83B12_CAPACITIVE_TOUCH_H */

/************************ (C) COPYRIGHT Yuwell *****END OF FILE****/