jarvis/current_v
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

带功率检测功能的代码

Browse Source
This commit is contained in:
ipason 2026-01-08 08:45:31 +08:00
parent d5a4f2a778
commit 92f7b18ac4
6 changed files with 155 additions and 104 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

135
8F-3AW-PowerMeter/power_meter.c → 8F_5AW_PowerMeter/8f_5aw_powerMeter.c
View File

@ -1,6 +1,6 @@
/** /**
****************************************************************************** ******************************************************************************
* @file power_meter.c * @file 8f_5aw_powerMeter.c
* @author Motor Control SDK Team, Yuwell Software XiangenWang * @author Motor Control SDK Team, Yuwell Software XiangenWang
* @brief Voice Recognition Module Initialization Section, * @brief Voice Recognition Module Initialization Section,
including peripheral initialization and message node insertion, etc. including peripheral initialization and message node insertion, etc.
@ -47,14 +47,14 @@
*/ */
/* USER CODE END Header */ /* USER CODE END Header */
#include "power_meter.h" #include "8f_5aw_powerMeter.h"
// 提供给外部的采样结果数据 // 提供给外部的采样结果数据
EleC_V_data elec_v_data; EleC_V_Data elec_v_data;
#if COULOMBMETER_SET_FUNC_ENABLE #if POWER_METER_SET_FUNC_ENABLE // 使用默认寄存器配置 不修改寄存器内容
/** /**
* @brief 向BL0942指定寄存器写入24位数据 * @brief 向BL0942指定寄存器写入24位数据
* @param addr: 寄存器地址(8位) * @param addr: 寄存器地址(8位)
@ -65,25 +65,25 @@ EleC_V_data elec_v_data;
* 3. 校验和计算：(写命令+地址+3字节数据)的低8位取反 * 3. 校验和计算：(写命令+地址+3字节数据)的低8位取反
* 4. 数据发送大小限定为3个字节，超出部分无效 * 4. 数据发送大小限定为3个字节，超出部分无效
*/ */
static void coulombmeter_write_reg(uint8_t addr, uint8_t* reg_data) static void power_meter_write_reg(uint8_t addr, uint8_t* reg_data)
{ {
uint8_t check_sum = 0; uint8_t check_sum = 0;
// 1. 下发命令字节 BL0942_ADDR_W // 1. 下发命令字节 BL0942_ADDR_W
COULOMBMETER_UART_TRANS_BYTE(BL0942_ADDR_W); POWER_METER_UART_TRANS_BYTE(BL0942_ADDR_W);
// 2. 下发需要写寄存器的地址 // 2. 下发需要写寄存器的地址
COULOMBMETER_UART_TRANS_BYTE(addr); POWER_METER_UART_TRANS_BYTE(addr);
// 3. 发送需要往寄存器地址写入的数据 // 3. 发送需要往寄存器地址写入的数据
COULOMBMETER_UART_TRANS_BYTE(reg_data[0]); POWER_METER_UART_TRANS_BYTE(reg_data[0]);
COULOMBMETER_UART_TRANS_BYTE(reg_data[1]); POWER_METER_UART_TRANS_BYTE(reg_data[1]);
COULOMBMETER_UART_TRANS_BYTE(reg_data[2]); POWER_METER_UART_TRANS_BYTE(reg_data[2]);
// 4. 发送校验和 // 4. 发送校验和
check_sum = (BL0942_ADDR_W + addr + reg_data[0] + reg_data[1] + reg_data[2]); check_sum = (BL0942_ADDR_W + addr + reg_data[0] + reg_data[1] + reg_data[2]);
check_sum = ~(check_sum & 0xFF); check_sum = ~(check_sum & 0xFF);
COULOMBMETER_UART_TRANS_BYTE(check_sum); POWER_METER_UART_TRANS_BYTE(check_sum);
} }
#endif #endif
@ -96,15 +96,15 @@ static void coulombmeter_write_reg(uint8_t addr, uint8_t* reg_data)
* @retval 无 * @retval 无
* @note 1. 通信协议：UART发送帧格式为[读命令(BL0942_ADDR_R)+寄存器地址] * @note 1. 通信协议：UART发送帧格式为[读命令(BL0942_ADDR_R)+寄存器地址]
* 2. 芯片收到读命令后，会在150us内通过UART返回4字节数据(3字节有效数据+1字节校验) * 2. 芯片收到读命令后，会在150us内通过UART返回4字节数据(3字节有效数据+1字节校验)
* 3. 建议1s执行一次该函数，返回数据在UART接收中断中处理 * 3. 建议500ms执行一次该函数，返回数据在UART接收中断中处理(系统寄存器每隔400ms刷新一次)
*/ */
static void coulombmeter_read_reg(uint8_t addr) static void power_meter_read_reg(uint8_t addr)
{ {
// 1. 下发命令字节 BL0942_ADDR_R // 1. 下发命令字节 BL0942_ADDR_R
COULOMBMETER_UART_TRANS_BYTE(BL0942_ADDR_R); POWER_METER_UART_TRANS_BYTE(BL0942_ADDR_R);
// 2. 下发地址数据 // 2. 下发地址数据
COULOMBMETER_UART_TRANS_BYTE(addr); POWER_METER_UART_TRANS_BYTE(addr);
} }
@ -123,20 +123,20 @@ static void coulombmeter_read_reg(uint8_t addr)
void User_PowerMeter_Init(void) void User_PowerMeter_Init(void)
{ {
FL_GPIO_InitTypeDef GPIO_InitStruct; FL_GPIO_InitTypeDef GPIO_InitStruct;
// 初始化GPIO // 初始化GPIO
GPIO_InitStruct.pin = COULOMBMETER_UART_RX_GPIO_PIN; GPIO_InitStruct.pin = POWER_METER_UART_RX_GPIO_PIN;
GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL; GPIO_InitStruct.mode = FL_GPIO_MODE_DIGITAL;
GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL; GPIO_InitStruct.outputType = FL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.pull = FL_DISABLE; GPIO_InitStruct.pull = FL_DISABLE;
GPIO_InitStruct.remapPin = FL_DISABLE; GPIO_InitStruct.remapPin = FL_DISABLE;
GPIO_InitStruct.analogSwitch = FL_DISABLE; GPIO_InitStruct.analogSwitch = FL_DISABLE;
FL_GPIO_Init(COULOMBMETER_UART_RX_GPIO_PORT, &GPIO_InitStruct); FL_GPIO_Init(POWER_METER_UART_RX_GPIO_PORT, &GPIO_InitStruct);
GPIO_InitStruct.pin = COULOMBMETER_UART_TX_GPIO_PIN; GPIO_InitStruct.pin = POWER_METER_UART_TX_GPIO_PIN;
FL_GPIO_Init(COULOMBMETER_UART_TX_GPIO_PORT, &GPIO_InitStruct); FL_GPIO_Init(POWER_METER_UART_TX_GPIO_PORT, &GPIO_InitStruct);
// 初始化串口参数 // 初始化串口参数
FL_UART_InitTypeDef UART_InitStruct = {0}; FL_UART_InitTypeDef UART_InitStruct = {0};
@ -145,20 +145,18 @@ void User_PowerMeter_Init(void)
UART_InitStruct.stopBits = FL_UART_STOP_BIT_WIDTH_1B; //停止位 UART_InitStruct.stopBits = FL_UART_STOP_BIT_WIDTH_1B; //停止位
UART_InitStruct.parity = FL_UART_PARITY_NONE; //奇偶校验 UART_InitStruct.parity = FL_UART_PARITY_NONE; //奇偶校验
UART_InitStruct.transferDirection = FL_UART_DIRECTION_TX_RX; //接收-发送使能 UART_InitStruct.transferDirection = FL_UART_DIRECTION_TX_RX; //接收-发送使能
FL_UART_Init(COULOMBMETER_USED_UART_NUM, &UART_InitStruct); FL_UART_Init(POWER_METER_USED_UART_NUM, &UART_InitStruct);
NVIC_DisableIRQ(COULOMBMETER_IRQn); NVIC_DisableIRQ(POWER_METER_IRQn);
NVIC_SetPriority(COULOMBMETER_IRQn,2); //中断优先级配置 NVIC_SetPriority(POWER_METER_IRQn,2); //中断优先级配置
NVIC_EnableIRQ(COULOMBMETER_IRQn); NVIC_EnableIRQ(POWER_METER_IRQn);
// 开启接收中断 // 开启接收中断
FL_UART_ClearFlag_RXBuffFull(COULOMBMETER_USED_UART_NUM); FL_UART_ClearFlag_RXBuffFull(POWER_METER_USED_UART_NUM);
FL_UART_EnableIT_RXBuffFull(COULOMBMETER_USED_UART_NUM); FL_UART_EnableIT_RXBuffFull(POWER_METER_USED_UART_NUM);
// 清空结果 // 清空结果
memset(&elec_v_data, 0, sizeof(elec_v_data)); memset(&elec_v_data, 0, sizeof(elec_v_data));
} }
@ -173,27 +171,36 @@ void User_PowerMeter_Init(void)
* 3. 触发读取后，会设置对应的等待状态，数据接收和解析在UART中断中完成 * 3. 触发读取后，会设置对应的等待状态，数据接收和解析在UART中断中完成
* 4. 最终解析后的电压/电流值存储在全局变量elec_v_data中 * 4. 最终解析后的电压/电流值存储在全局变量elec_v_data中
*/ */
void User_Coulombmeter_Data_refresh(void) void User_Power_refresh(void)
{ {
static Bus_Mod mod = MOD_CURRENT_METER; static Bus_Mod mod = MOD_VOLTAGE_METER;
if(mod == MOD_VOLTAGE_METER) if(mod == MOD_VOLTAGE_METER)
{ {
mod = MOD_CURRENT_METER; mod = MOD_CURRENT_METER;
coulombmeter_read_reg(Addr_V_RMS); power_meter_read_reg(Addr_V_RMS);
elec_v_data.bus_com_stm = BUS_COM_STATE_WAITE_VOLTAGE; // 转入等待电压数据状态 elec_v_data.bus_com_stm = BUS_COM_STATE_WAITE_VOLTAGE; // 转入等待电压数据状态
elec_v_data.current_index = 0; elec_v_data.current_index = 0;
elec_v_data.voltage_raw = 0; elec_v_data.voltage_raw = 0;
}else{ }else if(mod == MOD_CURRENT_METER){
mod = MOD_VOLTAGE_METER; mod = MOD_POWER_METER;
coulombmeter_read_reg(Addr_I_RMS); power_meter_read_reg(Addr_I_RMS);
elec_v_data.bus_com_stm = BUS_COM_STATE_WAITE_CURRENT; // 转入等待电压数据状态 elec_v_data.bus_com_stm = BUS_COM_STATE_WAITE_CURRENT; // 转入等待电流数据状态
elec_v_data.current_index = 0; elec_v_data.current_index = 0;
elec_v_data.current_raw = 0; elec_v_data.current_raw = 0;
}else if(mod == MOD_POWER_METER){
mod = MOD_VOLTAGE_METER;
power_meter_read_reg(Addr_WATT);
elec_v_data.bus_com_stm = BUS_COM_STATE_WAITE_POWER; // 转入等待功率数据状态
elec_v_data.current_index = 0;
elec_v_data.power_raw = 0;
} }
} }
@ -201,21 +208,21 @@ void User_Coulombmeter_Data_refresh(void)
/** /**
* @brief UART5中断服务函数（库仑计数据接收处理） * @brief UART5中断服务函数（电量计数据接收处理）
* @param 无 * @param 无
* @retval 无 * @retval 无
* @note 1. 仅处理接收缓冲区满中断(RXBuffFull) * @note 1. 仅处理接收缓冲区满中断(RXBuffFull)
* 2. 根据当前通信状态(BUS_COM_STATE)分别处理电压/电流数据 * 2. 根据当前通信状态(BUS_COM_STATE)分别处理电压/电流/有功功率数据
* 3. 数据接收格式：3字节有效数据(低位在前)+1字节校验和 * 3. 数据接收格式：3字节有效数据(低位在前)+1字节校验和
* 4. 校验和验证通过后，转换为实际电压(V)/电流(mA)值并更新全局变量 * 4. 校验和验证通过后，转换为实际电压(V)/电流(mA)/有功功率值并更新全局变量
* 5. 接收中断标志通过读取RXBuff寄存器自动清除，需手动清除RXBuffFull标志 * 5. 接收中断标志通过读取RXBuff寄存器自动清除，为防止出现脏数据还需手动清除RXBuffFull标志
*/ */
void UART5_IRQHandler(void) void UART5_IRQHandler(void)
{ {
// 接收中断处理 // 接收中断处理
if(FL_UART_IsEnabledIT_RXBuffFull(COULOMBMETER_USED_UART_NUM) && if(FL_UART_IsEnabledIT_RXBuffFull(POWER_METER_USED_UART_NUM) &&
FL_UART_IsActiveFlag_RXBuffFull(COULOMBMETER_USED_UART_NUM)) FL_UART_IsActiveFlag_RXBuffFull(POWER_METER_USED_UART_NUM))
{ {
if(elec_v_data.bus_com_stm == BUS_COM_STATE_WAITE_VOLTAGE) if(elec_v_data.bus_com_stm == BUS_COM_STATE_WAITE_VOLTAGE)
@ -223,7 +230,7 @@ void UART5_IRQHandler(void)
//接收中断标志可通过读取rxreg寄存器清除 //接收中断标志可通过读取rxreg寄存器清除
uint8_t tmp_data = 0; uint8_t tmp_data = 0;
tmp_data = FL_UART_ReadRXBuff(COULOMBMETER_USED_UART_NUM); tmp_data = FL_UART_ReadRXBuff(POWER_METER_USED_UART_NUM);
if(elec_v_data.current_index < 3) if(elec_v_data.current_index < 3)
{ {
@ -254,7 +261,7 @@ void UART5_IRQHandler(void)
}else if(elec_v_data.bus_com_stm == BUS_COM_STATE_WAITE_CURRENT) }else if(elec_v_data.bus_com_stm == BUS_COM_STATE_WAITE_CURRENT)
{ {
uint8_t tmp_data = 0; uint8_t tmp_data = 0;
tmp_data = FL_UART_ReadRXBuff(COULOMBMETER_USED_UART_NUM); tmp_data = FL_UART_ReadRXBuff(POWER_METER_USED_UART_NUM);
if(elec_v_data.current_index < 3) if(elec_v_data.current_index < 3)
{ {
@ -282,9 +289,47 @@ void UART5_IRQHandler(void)
} }
}
}else if(elec_v_data.bus_com_stm == BUS_COM_STATE_WAITE_POWER)
{
uint8_t tmp_data = 0;
tmp_data = FL_UART_ReadRXBuff(POWER_METER_USED_UART_NUM);
if(elec_v_data.current_index < 3)
{
elec_v_data.power_raw |= (tmp_data<<(elec_v_data.current_index*8));
}
elec_v_data.power_array[elec_v_data.current_index++] = tmp_data;
if(elec_v_data.current_index == 4)
{
uint8_t checkSum = ~((elec_v_data.power_array[0] + elec_v_data.power_array[1] + elec_v_data.power_array[2] + BL0942_ADDR_R + Addr_WATT)&0xFF);
if(elec_v_data.power_array[3] == checkSum)
{
// 校验正确对数据进行赋值
elec_v_data.bus_com_stm = BUS_COM_STATE_IDLE;
// 当接收到的数据为负值时将其转为正值
if(elec_v_data.power_array[2] > 0x7F)
{
elec_v_data.power_raw = ~elec_v_data.power_raw + 1;
}
elec_v_data.bus_active_power_watt = elec_v_data.power_raw * 100 /Power_K;
elec_v_data.power_raw = 0;
elec_v_data.current_index = 0;
}
}
FL_UART_ClearFlag_RXBuffFull(COULOMBMETER_USED_UART_NUM); }
FL_UART_ClearFlag_RXBuffFull(POWER_METER_USED_UART_NUM);
} }
} }

60
8F-3AW-PowerMeter/power_meter.h → 8F_5AW_PowerMeter/8f_5aw_powerMeter.h
View File

@ -1,7 +1,7 @@
/* USER CODE BEGIN Header */ /* USER CODE BEGIN Header */
/** /**
****************************************************************************** ******************************************************************************
* @file : power_meter.h * @file : 8f_5aw_powerMeter.h
* @brief : 电量计驱动程序 * @brief : 电量计驱动程序
* @version : 1.0 * @version : 1.0
* @changelog : version 1.0 初始版本 2025.12.31 * @changelog : version 1.0 初始版本 2025.12.31
@ -23,8 +23,8 @@
/* USER CODE END Header */ /* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/ /* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __COULOMBMETER_H #ifndef __8F_5AW_POWER_METER_H
#define __COULOMBMETER_H #define __8F_5AW_POWER_METER_H
#ifdef __cplusplus #ifdef __cplusplus
extern "C" { extern "C" {
@ -36,23 +36,22 @@ extern "C" {
/************************** 硬件参数重映射 **************************/ /************************** 硬件参数重映射 **************************/
/* 对硬件使用进行配置 */ // 对硬件进行重定向
#define COULOMBMETER_USED_UART_NUM UART5 #define POWER_METER_USED_UART_NUM UART5
#define COULOMBMETER_UART_TX_GPIO_PORT GPIOC #define POWER_METER_UART_TX_GPIO_PORT GPIOC
#define COULOMBMETER_UART_TX_GPIO_PIN FL_GPIO_PIN_5 #define POWER_METER_UART_TX_GPIO_PIN FL_GPIO_PIN_5
#define COULOMBMETER_UART_RX_GPIO_PORT GPIOC #define POWER_METER_UART_RX_GPIO_PORT GPIOC
#define COULOMBMETER_UART_RX_GPIO_PIN FL_GPIO_PIN_4 #define POWER_METER_UART_RX_GPIO_PIN FL_GPIO_PIN_4
#define POWER_METER_IRQn UART5_IRQn
#define COULOMBMETER_IRQn UART5_IRQn
// CPU阻塞式发送 // CPU阻塞式发送
#define CHECK_TRANS_DONE while(FL_UART_IsActiveFlag_TXShiftBuffEmpty(COULOMBMETER_USED_UART_NUM) != FL_SET){}; #define CHECK_TRANS_DONE while(FL_UART_IsActiveFlag_TXShiftBuffEmpty(POWER_METER_USED_UART_NUM) != FL_SET){};
#define COULOMBMETER_UART_TRANS_BYTE(x) FL_UART_WriteTXBuff(COULOMBMETER_USED_UART_NUM, x);CHECK_TRANS_DONE; #define POWER_METER_UART_TRANS_BYTE(x) FL_UART_WriteTXBuff(POWER_METER_USED_UART_NUM, x);CHECK_TRANS_DONE;
#define COULOMBMETER_SET_FUNC_ENABLE (0) #define POWER_METER_SET_FUNC_ENABLE (0)
/************************** 芯片内部寄存器地址定义 **************************/ /************************** 芯片内部寄存器地址定义 **************************/
@ -100,10 +99,10 @@ extern "C" {
// 电流采用1毫欧电阻采样，电压采用390K*5+0.51K进行分压，实际测试发现电阻存在偏差，进行微调 // 电流采用1毫欧电阻采样，电压采用390K*5+0.51K进行分压，实际测试发现电阻存在偏差，进行微调
// BL0942评估版，立创直接贴片合金电阻(台湾厚声MS121WF100NT4E )，实际测量比1毫欧偏小，约0.93毫欧 // BL0942评估版，立创直接贴片合金电阻(台湾厚声MS121WF100NT4E )，实际测量比1毫欧偏小，约0.93毫欧
#define Power_K 5798; //理论值*0.93 #define Power_K 6234; // 理论值
#define Current_K 50243; //理论值*0.93 #define Current_K 25121; // 理论值
#define Voltage_K 15883; // #define Voltage_K 15883; // 理论值
#define Energy_K 4976; //理论值*0.93 #define Energy_K 4976; // 理论值
//采用美隆1毫欧贴片合金电阻，实际比1毫欧偏大，约1.023毫欧 //采用美隆1毫欧贴片合金电阻，实际比1毫欧偏大，约1.023毫欧
/* /*
@ -122,6 +121,7 @@ typedef enum
BUS_COM_STATE_IDLE, BUS_COM_STATE_IDLE,
BUS_COM_STATE_WAITE_CURRENT, BUS_COM_STATE_WAITE_CURRENT,
BUS_COM_STATE_WAITE_VOLTAGE, BUS_COM_STATE_WAITE_VOLTAGE,
BUS_COM_STATE_WAITE_POWER,
BUS_CHECK_ERROR, BUS_CHECK_ERROR,
BUS_COM_STATE_WAITE_CHECK BUS_COM_STATE_WAITE_CHECK
@ -131,16 +131,21 @@ typedef enum
typedef enum typedef enum
{ {
MOD_CURRENT_METER, MOD_CURRENT_METER,
MOD_VOLTAGE_METER MOD_VOLTAGE_METER,
MOD_POWER_METER
}Bus_Mod; }Bus_Mod;
typedef struct typedef struct
{ {
uint16_t bus_rms_current_mA; // 总线供电电路有效值 单位为mA uint16_t bus_rms_current_mA; // 总线供电电路有效值 单位为mA
uint16_t bus_rms_voltage_V; // 总线供电电压有效值 单位为V uint16_t bus_rms_voltage_V; // 总线供电电压有效值 单位为V
uint16_t bus_active_power_watt; // 总线有功功率 单位为瓦特
uint32_t power_raw;
uint8_t power_array[4];
uint32_t voltage_raw; uint32_t voltage_raw;
uint8_t voltage_array[4]; uint8_t voltage_array[4];
@ -151,23 +156,24 @@ typedef struct
uint8_t current_index; uint8_t current_index;
}EleC_V_data; }EleC_V_Data;
extern EleC_V_data elec_v_data; extern EleC_V_Data elec_v_data; // 周期性刷新该结构体变量中的内容 通过读取变量成员获取当前电压、电流、有功功率
/************************** 外部API函数导出 **************************/ /************************** 外部API函数导出 **************************/
void User_PowerMeter_Init(void); void User_PowerMeter_Init(void); // 上电后执行一次 用于初始化GPIO UART
void UART5_IRQHandler(void); void User_Power_refresh(void); // 每500ms以上时间执行一次该函数以刷新elec_v_data中内容。
void User_Coulombmeter_Data_refresh(void);
void UART5_IRQHandler(void);
#ifdef __cplusplus #ifdef __cplusplus
} }
#endif #endif
#endif /* __COULOMBMETER_H */ #endif /* __8F_5AW_POWER_METER_H */
/************************ (C) COPYRIGHT Yuwell *****END OF FILE****/ /************************ (C) COPYRIGHT Yuwell *****END OF FILE****/

46
MDK-ARM/LG048-8F-10W.uvguix.Admin
View File

File diff suppressed because one or more lines are too long

8
MDK-ARM/LG048-8F-10W.uvoptx
View File

@ -117,10 +117,6 @@
<pMon>Segger\JL2CM3.dll</pMon> <pMon>Segger\JL2CM3.dll</pMon>
</DebugOpt> </DebugOpt>
<TargetDriverDllRegistry> <TargetDriverDllRegistry>
<SetRegEntry>
<Number>0</Number>
<Key>DLGUARM</Key>
</SetRegEntry>
<SetRegEntry> <SetRegEntry>
<Number>0</Number> <Number>0</Number>
<Key>JL2CM3</Key> <Key>JL2CM3</Key>
@ -308,8 +304,8 @@
<tvExp>0</tvExp> <tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg> <tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2> <bDave2>0</bDave2>
<PathWithFileName>..\8F-3AW-PowerMeter\power_meter.c</PathWithFileName> <PathWithFileName>..\8F_5AW_PowerMeter\8f_5aw_powerMeter.c</PathWithFileName>
<FilenameWithoutPath>power_meter.c</FilenameWithoutPath> <FilenameWithoutPath>8f_5aw_powerMeter.c</FilenameWithoutPath>
<RteFlg>0</RteFlg> <RteFlg>0</RteFlg>
<bShared>0</bShared> <bShared>0</bShared>
</File> </File>

6
MDK-ARM/LG048-8F-10W.uvprojx
View File

@ -340,7 +340,7 @@
<MiscControls></MiscControls> <MiscControls></MiscControls>
<Define>FM33LG0XX,USE_FULL_ASSERT</Define> <Define>FM33LG0XX,USE_FULL_ASSERT</Define>
<Undefine></Undefine> <Undefine></Undefine>
<IncludePath>..\Drivers\CMSIS;..\Drivers\FM33LG0xx_FL_Driver\Inc;..\Inc;..\MF-config\Inc;..\8F-3AW-PowerMeter</IncludePath> <IncludePath>..\Drivers\CMSIS;..\Drivers\FM33LG0xx_FL_Driver\Inc;..\Inc;..\MF-config\Inc;..\8F_5AW_PowerMeter</IncludePath>
</VariousControls> </VariousControls>
</Cads> </Cads>
<Aads> <Aads>
@ -420,9 +420,9 @@
<FilePath>..\Src\fm33lg0xx_fl_common.c</FilePath> <FilePath>..\Src\fm33lg0xx_fl_common.c</FilePath>
</File> </File>
<File> <File>
<FileName>power_meter.c</FileName> <FileName>8f_5aw_powerMeter.c</FileName>
<FileType>1</FileType> <FileType>1</FileType>
<FilePath>..\8F-3AW-PowerMeter\power_meter.c</FilePath> <FilePath>..\8F_5AW_PowerMeter\8f_5aw_powerMeter.c</FilePath>
</File> </File>
</Files> </Files>
</Group> </Group>

4
Src/main.c
View File

@ -51,7 +51,7 @@
#include "main.h" #include "main.h"
#include "fm33_assert.h" #include "fm33_assert.h"
#include "power_meter.h" #include "8f_5aw_powerMeter.h"
#define FREQ_CHECK_ENABLE (1) // 选择是否使能频率检查 仅在debug阶段使用 #define FREQ_CHECK_ENABLE (1) // 选择是否使能频率检查 仅在debug阶段使用
@ -110,7 +110,7 @@ int main(void)
{ {
FL_DelayMs(1000); FL_DelayMs(1000);
User_Coulombmeter_Data_refresh(); User_Power_refresh();
// LED灯闪烁 // LED灯闪烁
FL_GPIO_ToggleOutputPin(GPIOD, FL_GPIO_PIN_5); FL_GPIO_ToggleOutputPin(GPIOD, FL_GPIO_PIN_5);