current_v/Src/main.c

/**
  ******************************************************************************
  * @file    main.c 
  * @author  Motor Control SDK Team, Yuwell Software XiangenWang
  * @brief   Voice Recognition Module Initialization Section, 
	           including peripheral initialization and message node insertion, etc.
	* @version 1.0		
  * @changelog     version 1.0 初始版本	      2025.12.18
										- 新增：新建第一个版本的软件，待完善解析命令后的程序执行部分
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2025 Yuwell Software Danyang.Jiangsu.China.
  * All rights reserved.</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted, provided that the following conditions are met:
  *
  * 1. Redistribution of source code must retain the above copyright notice,
  *    this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  *    this list of conditions and the following disclaimer in the documentation
  *    and/or other materials provided with the distribution.
  * 3. Neither the name of Yuwell Software nor the names of other
  *    contributors to this software may be used to endorse or promote products
  *    derived from this software without specific written permission.
  * 4. This software, including modifications and/or derivative works of this
  *    software, must execute solely and exclusively on microcontroller or
  *    microprocessor devices manufactured by or for Yuwell Software.
  * 5. Redistribution and use of this software other than as permitted under
  *    this license is void and will automatically terminate your rights under
  *    this license.
  *
  * THIS SOFTWARE IS PROVIDED BY Yuwell Software AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
  * SHALL Yuwell Software OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 
	/* USER CODE END Header */
	
#include "main.h"
#include "fm33_assert.h"

#include "8f_5aw_powerMeter.h"


#define FREQ_CHECK_ENABLE         				(1)            // 选择是否使能频率检查 仅在debug阶段使用
#define WATCHDOG_ENABLE           				(0)

#if FREQ_CHECK_ENABLE
uint32_t apb_clk[3];
#endif





int main(void)
{

		FL_Init();                     															// 初始化Delay函数
		MF_Clock_Init();               															// 初始化时钟为RCHF
		SelXTHFToPLL(FL_CMU_PLL_PSC_DIV8, FL_MAIN_FREQ_Mhz - 1);    // 设置芯片工作主频


  
		FL_GPIO_InitTypeDef       GPIO_InitStruct;

    // 开启LED闪烁
		GPIO_InitStruct.pin              = FL_GPIO_PIN_5;         
		GPIO_InitStruct.mode             = FL_GPIO_MODE_OUTPUT;
		GPIO_InitStruct.outputType       = FL_GPIO_OUTPUT_PUSHPULL;
		GPIO_InitStruct.pull             = FL_ENABLE;
		GPIO_InitStruct.remapPin         = FL_DISABLE;
		GPIO_InitStruct.analogSwitch     = FL_DISABLE;
		
		FL_GPIO_Init(GPIOD, &GPIO_InitStruct);

  
  // 开启压缩机继电器
		GPIO_InitStruct.pin              = FL_GPIO_PIN_12; 
    FL_GPIO_Init(GPIOC, &GPIO_InitStruct);
		
		FL_GPIO_SetOutputPin(GPIOC, FL_GPIO_PIN_12);
    
    
    
		// 初始化定时器任务
#if FREQ_CHECK	
		/* 系统始终频率检测 */
		apb_clk[0] = FL_CMU_GetAPBClockFreq();
		apb_clk[1] = FL_CMU_GetAHBClockFreq();
		apb_clk[2] = FL_CMU_GetSystemClockFreq();
#endif	
	
	
    User_PowerMeter_Init();    // 初始化电量计芯片
	
    while(1)
    {   
      FL_DelayMs(1000);
      
      User_Power_refresh();
      
      // LED灯闪烁
      FL_GPIO_ToggleOutputPin(GPIOD, FL_GPIO_PIN_5);

    }

}