成功将Modbus设置为子组件

.vscode/settings.json

@@ -17,6 +17,7 @@
     "files.associations": {
         "ledc.h": "c",
         "gpio.h": "c",
-        "sdmmc_host.h": "c"
+        "sdmmc_host.h": "c",
+        "modbus_params.h": "c"
     }
 }

components/FluxMod/CMakeLists.txt

@@ -0,0 +1,3 @@
+idf_component_register(SRCS "FluxMod.c"
+                    REQUIRES espressif__esp-modbus
+                    INCLUDE_DIRS "." "C:/Espressif/frameworks/esp-idf-v5.3.1/examples/protocols/modbus/mb_example_common/include")

components/FluxMod/FluxMod.c

@@ -1,5 +1,5 @@
 
-#include "FreeBus.h"
+#include "FluxMod.h"
 
 static const char *TAG = "MASTER_TEST";
 
@@ -14,16 +14,12 @@ const mb_parameter_descriptor_t device_parameters[] = {
 // Calculate number of parameters in the table
 const uint16_t num_device_parameters = (sizeof(device_parameters)/sizeof(device_parameters[0]));
 
-static esp_err_t master_init(void)
+esp_err_t modbus_master_init(void)
 {
     // Initialize and start Modbus controller
     mb_communication_info_t comm = {
             .port = MB_PORT_NUM,
-#if CONFIG_MB_COMM_MODE_ASCII
-            .mode = MB_MODE_ASCII,
-#elif CONFIG_MB_COMM_MODE_RTU
             .mode = MB_MODE_RTU,
-#endif
             .baudrate = MB_DEV_SPEED,
             .parity = MB_PARITY_NONE
     };

components/FluxMod/FluxMod.h

@@ -62,4 +62,4 @@ enum {
 };
 
 /*Modbus总线初始化函数*/
-static esp_err_t master_init(void);
+esp_err_t modbus_master_init(void);

components/FluxUI/ui_events.c

@@ -19,6 +19,7 @@ void ReadSdCallFunc(lv_event_t * e)
 void F1callbackFunc(lv_event_t * e)
 {
 	// Your code here
+
 }
 
 void F2callbackFunc(lv_event_t * e)

main/CMakeLists.txt

@@ -3,8 +3,8 @@ if(CONFIG_EXAMPLE_LCD_IMAGE_FROM_EMBEDDED_BINARY)
     file(GLOB_RECURSE embedded_images images/*.c)
 endif()
 
-idf_component_register(SRCS "FreeBus.c" "i80_controller_example_main.c" "lvgl_demo_ui.c" ${embedded_images}
-REQUIRES FluxUI FluxPower spiffs FluxSD                   
+idf_component_register(SRCS "i80_controller_example_main.c" "lvgl_demo_ui.c" ${embedded_images}
+REQUIRES FluxUI FluxPower spiffs FluxSD FluxMod                 
 INCLUDE_DIRS ".")
 
 if(CONFIG_EXAMPLE_LCD_IMAGE_FROM_FILE_SYSTEM)

main/i80_controller_example_main.c

@@ -23,7 +23,7 @@
 #include "FluxSD.h"
 
 /*导入Modbus控制头文件*/
-#include "FreeBus.h"
+#include "FluxMod.h"
 
 //新增触摸屏驱动头文件
 #include "driver/i2c.h"
@@ -34,6 +34,8 @@
 
 static const char *TAG = "example";
 
+#include "modbus_params.h"  
+
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 //////////////////// Please update the following configuration according to your LCD spec //////////////////////////////
 ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
@@ -455,6 +457,9 @@ void app_main(void)
     /*初始化SD卡*/
     flux_sd_init();
 
+    /*初始化Modbus*/
+    //modbus_master_init();
+    
     // Lock the mutex due to the LVGL APIs are not thread-safe
     if (example_lvgl_lock(-1)) {
         //example_lvgl_demo_ui(disp);