diff --git a/.vscode/settings.json b/.vscode/settings.json
index 126d8c8..4abd6df 100644
--- a/.vscode/settings.json
+++ b/.vscode/settings.json
@@ -1,8 +1,8 @@
 {
     "C_Cpp.intelliSenseEngine": "default",
-    "idf.espIdfPathWin": "C:/Espressif/frameworks/esp-idf-v5.3.1/",
-    "idf.toolsPathWin": "C:\\Espressif",
-    "idf.pythonInstallPath": "C:\\Espressif\\tools\\idf-python\\3.11.2\\python.exe",
+    "idf.espIdfPathWin": "d:\\espidfEnv\\v5.3.2\\esp-idf",
+    "idf.toolsPathWin": "d:\\Espressif",
+    "idf.pythonInstallPath": "d:\\Espressif\\tools\\idf-python\\3.11.2\\python.exe",
     "idf.customExtraVars": {
         "OPENOCD_SCRIPTS": "d:\\Espressif\\tools\\openocd-esp32\\v0.12.0-esp32-20240318/openocd-esp32/share/openocd/scripts",
         "IDF_CCACHE_ENABLE": "1",
diff --git a/components/FluxMod/CMakeLists.txt b/components/FluxMod/CMakeLists.txt
index 49aa046..170ccf8 100644
--- a/components/FluxMod/CMakeLists.txt
+++ b/components/FluxMod/CMakeLists.txt
@@ -1,3 +1,3 @@
 idf_component_register(SRCS "FluxMod.c"
                     REQUIRES espressif__esp-modbus
-                    INCLUDE_DIRS "." "C:/Espressif/frameworks/esp-idf-v5.3.1/examples/protocols/modbus/mb_example_common/include")
\ No newline at end of file
+                    INCLUDE_DIRS "." "D:/espidfEnv/v5.3.2/esp-idf/examples/protocols/modbus/mb_example_common/include")
\ No newline at end of file
diff --git a/dependencies.lock b/dependencies.lock
index 8b27684..58fe80f 100644
--- a/dependencies.lock
+++ b/dependencies.lock
@@ -60,7 +60,7 @@ dependencies:
   idf:
     source:
       type: idf
-    version: 5.3.1
+    version: 5.3.2
   lvgl/lvgl:
     component_hash: d7c1ac037ae6e85d94897f807d6e7ba0946a83e720074fc95a4f6241da9f9f53
     dependencies: []
@@ -71,7 +71,7 @@ dependencies:
   mb_example_common:
     dependencies: []
     source:
-      path: C:\Espressif\frameworks\esp-idf-v5.3.1\examples\protocols\modbus\mb_example_common
+      path: D:\espidfEnv\v5.3.2\esp-idf\examples\protocols\modbus\mb_example_common
       type: local
     version: '*'
 direct_dependencies:
@@ -80,6 +80,6 @@ direct_dependencies:
 - espressif/esp_lcd_touch_ft5x06
 - lvgl/lvgl
 - mb_example_common
-manifest_hash: 0fff3197c3b0c27c07156e90440cc8d3ca007929576e672eaab5aeb49473afc1
+manifest_hash: 53662b48f2c071d39270339904304e42fe30509bdfe749beea1860fe6ff83816
 target: esp32s3
 version: 2.0.0
diff --git a/main/i80_controller_example_main.c b/main/i80_controller_example_main.c
index d5a1faf..0cb839f 100644
--- a/main/i80_controller_example_main.c
+++ b/main/i80_controller_example_main.c
@@ -365,6 +365,9 @@ void example_init_touch_panel(void)
 
 void app_main(void)
 {
+    /*初始化FluxButton - 上电之后的第一件事*/
+    button_init();
+
     static lv_disp_draw_buf_t disp_buf; // contains internal graphic buffer(s) called draw buffer(s)
     static lv_disp_drv_t disp_drv;      // contains callback functions
 
@@ -460,9 +463,6 @@ void app_main(void)
     /*初始化SD卡*/
     flux_sd_init();
 
-    /*初始化FluxButton*/
-    button_init();
-
     /*初始化Modbus*/
     ESP_ERROR_CHECK(modbus_master_init());
     
diff --git a/main/idf_component.yml b/main/idf_component.yml
index 4db4aa9..b998caa 100644
--- a/main/idf_component.yml
+++ b/main/idf_component.yml
@@ -4,5 +4,5 @@ dependencies:
   espressif/esp-modbus: ^1.0.13
   mb_example_common:
     path: 
-      C:/Espressif/frameworks/esp-idf-v5.3.1/examples/protocols/modbus/mb_example_common
+      D:\espidfEnv\v5.3.2\esp-idf/examples/protocols/modbus/mb_example_common
   espressif/button: ^3.2.0
diff --git a/sdkconfig b/sdkconfig
index 00c7a16..78101f9 100644
--- a/sdkconfig
+++ b/sdkconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) 5.3.1 Project Configuration
+# Espressif IoT Development Framework (ESP-IDF) 5.3.2 Project Configuration
 #
 CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
 CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
@@ -14,6 +14,8 @@ CONFIG_SOC_GDMA_SUPPORTED=y
 CONFIG_SOC_AHB_GDMA_SUPPORTED=y
 CONFIG_SOC_GPTIMER_SUPPORTED=y
 CONFIG_SOC_LCDCAM_SUPPORTED=y
+CONFIG_SOC_LCDCAM_I80_LCD_SUPPORTED=y
+CONFIG_SOC_LCDCAM_RGB_LCD_SUPPORTED=y
 CONFIG_SOC_MCPWM_SUPPORTED=y
 CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
 CONFIG_SOC_CACHE_SUPPORT_WRAP=y
@@ -119,6 +121,7 @@ CONFIG_SOC_GPIO_OUT_RANGE_MAX=48
 CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x0001FFFFFC000000
 CONFIG_SOC_GPIO_CLOCKOUT_BY_IO_MUX=y
 CONFIG_SOC_GPIO_CLOCKOUT_CHANNEL_NUM=3
+CONFIG_SOC_GPIO_SUPPORT_HOLD_IO_IN_DSLP=y
 CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM=8
 CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM=8
 CONFIG_SOC_DEDIC_GPIO_OUT_AUTO_ENABLE=y
@@ -189,6 +192,10 @@ CONFIG_SOC_LCD_RGB_PANELS=1
 CONFIG_SOC_LCD_I80_BUS_WIDTH=16
 CONFIG_SOC_LCD_RGB_DATA_WIDTH=16
 CONFIG_SOC_LCD_SUPPORT_RGB_YUV_CONV=y
+CONFIG_SOC_LCDCAM_I80_NUM_BUSES=1
+CONFIG_SOC_LCDCAM_I80_BUS_WIDTH=16
+CONFIG_SOC_LCDCAM_RGB_NUM_PANELS=1
+CONFIG_SOC_LCDCAM_RGB_DATA_WIDTH=16
 CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128
 CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=549
 CONFIG_SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH=128
@@ -331,6 +338,7 @@ CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
 CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y
 CONFIG_SOC_MEMSPI_TIMING_TUNING_BY_MSPI_DELAY=y
 CONFIG_SOC_MEMSPI_CORE_CLK_SHARED_WITH_PSRAM=y
+CONFIG_SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP=y
 CONFIG_SOC_COEX_HW_PTI=y
 CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE=y
 CONFIG_SOC_SDMMC_USE_GPIO_MATRIX=y
@@ -702,6 +710,7 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
 #
 CONFIG_ESP_COEX_ENABLED=y
 # CONFIG_ESP_COEX_EXTERNAL_COEXIST_ENABLE is not set
+# CONFIG_ESP_COEX_GPIO_DEBUG is not set
 # end of Wireless Coexistence
 
 #
@@ -892,6 +901,12 @@ CONFIG_ESP_REV_MIN_FULL=0
 #
 CONFIG_ESP32S3_REV_MAX_FULL=99
 CONFIG_ESP_REV_MAX_FULL=99
+CONFIG_ESP_EFUSE_BLOCK_REV_MIN_FULL=0
+CONFIG_ESP_EFUSE_BLOCK_REV_MAX_FULL=199
+
+#
+# Maximum Supported ESP32-S3 eFuse Block Revision (eFuse Block Rev v1.99)
+#
 # end of Chip revision
 
 #
@@ -968,7 +983,6 @@ CONFIG_ESP_SPI_BUS_LOCK_ISR_FUNCS_IN_IRAM=y
 #
 # LCD Peripheral Configuration
 #
-CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
 # CONFIG_LCD_ENABLE_DEBUG_LOG is not set
 # CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set
 # CONFIG_LCD_RGB_RESTART_IN_VSYNC is not set
@@ -985,6 +999,7 @@ CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y
 # CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set
 # CONFIG_ESP_NETIF_L2_TAP is not set
 # CONFIG_ESP_NETIF_BRIDGE_EN is not set
+# CONFIG_ESP_NETIF_SET_DNS_PER_DEFAULT_NETIF is not set
 # end of ESP NETIF Adapter
 
 #
@@ -1014,6 +1029,7 @@ CONFIG_ESP_PHY_CALIBRATION_MODE=0
 # Power Management
 #
 # CONFIG_PM_ENABLE is not set
+# CONFIG_PM_SLP_IRAM_OPT is not set
 CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
 CONFIG_PM_RESTORE_CACHE_TAGMEM_AFTER_LIGHT_SLEEP=y
 # end of Power Management
@@ -1051,6 +1067,7 @@ CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
 # CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP is not set
 CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
 # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
+# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
 # end of SPI RAM config
 # end of ESP PSRAM
 
@@ -1391,6 +1408,7 @@ CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
 CONFIG_HAL_WDT_USE_ROM_IMPL=y
 CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y
 CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y
+# CONFIG_HAL_ECDSA_GEN_SIG_CM is not set
 # end of Hardware Abstraction Layer (HAL) and Low Level (LL)
 
 #
@@ -1537,6 +1555,9 @@ CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
+CONFIG_LWIP_IPV6_ND6_NUM_PREFIXES=5
+CONFIG_LWIP_IPV6_ND6_NUM_ROUTERS=3
+CONFIG_LWIP_IPV6_ND6_NUM_DESTINATIONS=10
 # CONFIG_LWIP_PPP_SUPPORT is not set
 CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
 CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
@@ -1569,8 +1590,10 @@ CONFIG_LWIP_SNTP_MAXIMUM_STARTUP_DELAY=5000
 #
 # DNS
 #
+CONFIG_LWIP_DNS_MAX_HOST_IP=1
 CONFIG_LWIP_DNS_MAX_SERVERS=3
 # CONFIG_LWIP_FALLBACK_DNS_SERVER_SUPPORT is not set
+# CONFIG_LWIP_DNS_SETSERVER_WITH_NETIF is not set
 # end of DNS
 
 CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7
@@ -1594,6 +1617,8 @@ CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y
 CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
 # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
 # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
+CONFIG_LWIP_HOOK_DNS_EXT_RESOLVE_NONE=y
+# CONFIG_LWIP_HOOK_DNS_EXT_RESOLVE_CUSTOM is not set
 # CONFIG_LWIP_HOOK_IP6_INPUT_NONE is not set
 CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT=y
 # CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set
@@ -1657,6 +1682,7 @@ CONFIG_MBEDTLS_HAVE_TIME=y
 # CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
 CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
 CONFIG_MBEDTLS_SHA512_C=y
+# CONFIG_MBEDTLS_SHA3_C is not set
 CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
 # CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
 # CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
@@ -1733,6 +1759,7 @@ CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
 # CONFIG_MBEDTLS_HKDF_C is not set
 # CONFIG_MBEDTLS_THREADING_C is not set
 CONFIG_MBEDTLS_ERROR_STRINGS=y
+CONFIG_MBEDTLS_FS_IO=y
 # end of mbedTLS
 
 #
@@ -1860,6 +1887,7 @@ CONFIG_SPI_FLASH_HPM_DC_AUTO=y
 CONFIG_SPI_FLASH_SUSPEND_QVL_SUPPORTED=y
 # CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
 CONFIG_SPI_FLASH_SUSPEND_TSUS_VAL_US=50
+# CONFIG_SPI_FLASH_FORCE_ENABLE_XMC_C_SUSPEND is not set
 # end of Optional and Experimental Features (READ DOCS FIRST)
 # end of Main Flash configuration
 
@@ -1985,16 +2013,22 @@ CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y
 # CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT is not set
 
 #
-# Root Hub configuration
+# Hub Driver Configuration
+#
+
+#
+# Root Port configuration
 #
 CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250
 CONFIG_USB_HOST_RESET_HOLD_MS=30
 CONFIG_USB_HOST_RESET_RECOVERY_MS=30
 CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10
-# end of Root Hub configuration
+# end of Root Port configuration
+
+# CONFIG_USB_HOST_HUBS_SUPPORTED is not set
+# end of Hub Driver Configuration
 
 # CONFIG_USB_HOST_ENABLE_ENUM_FILTER_CALLBACK is not set
-# CONFIG_USB_HOST_EXT_HUB_SUPPORT is not set
 CONFIG_USB_OTG_SUPPORTED=y
 # end of USB-OTG
 
@@ -2029,7 +2063,6 @@ CONFIG_WL_SECTOR_SIZE=4096
 #
 CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
 CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
-# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
 CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
 # CONFIG_WIFI_PROV_STA_FAST_SCAN is not set
 # end of Wi-Fi Provisioning Manager