成功实现电池电量管理部分
This commit is contained in:
jarvis
parent
926f0fe699
commit
09cc51331d
8
.vscode/settings.json
vendored
8
.vscode/settings.json
vendored
@ -1,8 +1,8 @@
|
||||
{
|
||||
"C_Cpp.intelliSenseEngine": "default",
|
||||
"idf.espIdfPathWin": "d:\\espidfEnv\\v5.3.2\\esp-idf",
|
||||
"idf.toolsPathWin": "d:\\Espressif",
|
||||
"idf.pythonInstallPath": "d:\\Espressif\\tools\\idf-python\\3.11.2\\python.exe",
|
||||
"idf.espIdfPathWin": "C:/Espressif/frameworks/esp-idf-v5.3.1/",
|
||||
"idf.toolsPathWin": "C:\\Espressif",
|
||||
"idf.pythonInstallPath": "C:\\Espressif\\tools\\idf-python\\3.11.2\\python.exe",
|
||||
"idf.customExtraVars": {
|
||||
"OPENOCD_SCRIPTS": "d:\\Espressif\\tools\\openocd-esp32\\v0.12.0-esp32-20240318/openocd-esp32/share/openocd/scripts",
|
||||
"IDF_CCACHE_ENABLE": "1",
|
||||
@ -12,7 +12,7 @@
|
||||
"idf.openOcdConfigs": [
|
||||
"board/esp32s3-builtin.cfg"
|
||||
],
|
||||
"idf.portWin": "COM5",
|
||||
"idf.portWin": "COM6",
|
||||
"idf.flashType": "UART",
|
||||
"files.associations": {
|
||||
"ledc.h": "c",
|
||||
|
||||
@ -38,10 +38,10 @@ static void button_event_cb(void *arg, void *data)
|
||||
{
|
||||
case BUTTON_CMD_POWER_ON:
|
||||
/*响应电源键按下事件*/
|
||||
gpio_set_level(BUTTON_PowerOut_IO_NUM, POWER_ON_OUT_LEVEL);
|
||||
POWER_ON;
|
||||
break;
|
||||
case BUTTON_CMD_POWER_OFF:
|
||||
gpio_set_level(BUTTON_PowerOut_IO_NUM, POWER_OFF_OUT_LEVEL);
|
||||
POWER_OFF;
|
||||
break;
|
||||
|
||||
case BUTTON_CMD_CENTER_KEY:
|
||||
|
||||
@ -16,6 +16,9 @@
|
||||
#define BUTTON_ACTIVE_LEVEL 0
|
||||
#define BUTTON_POWERIN_ACTIVE_LEVEL 1
|
||||
|
||||
#define POWER_OFF gpio_set_level(BUTTON_PowerOut_IO_NUM, POWER_OFF_OUT_LEVEL);
|
||||
#define POWER_ON gpio_set_level(BUTTON_PowerOut_IO_NUM, POWER_ON_OUT_LEVEL);
|
||||
|
||||
/*¶¨Òå°´¼ü¿ØÖÆÖ¸ÁîÂë*/
|
||||
enum button_cmd_t
|
||||
{
|
||||
|
||||
@ -1,3 +1,3 @@
|
||||
idf_component_register(SRCS "FluxMod.c"
|
||||
REQUIRES espressif__esp-modbus
|
||||
INCLUDE_DIRS "." "D:/espidfEnv/v5.3.2/esp-idf/examples/protocols/modbus/mb_example_common/include")
|
||||
INCLUDE_DIRS "." "C:/Espressif/frameworks/esp-idf-v5.3.1/examples/protocols/modbus/mb_example_common/include")
|
||||
@ -8,25 +8,39 @@ extern lv_obj_t * ui_Batinfo_valueVolume;
|
||||
extern lv_obj_t * ui_Batinfo_SpinboxBAT;
|
||||
extern lv_obj_t * ui_Batinfo_BarBAT;
|
||||
extern lv_obj_t * ui_Home_LabelHeaderBatValue;
|
||||
|
||||
extern lv_obj_t * ui_Home_SliderHeaderBat;
|
||||
|
||||
/*没有返回值的电源管理任务*/
|
||||
int Bat_Adc_Value = 0;
|
||||
adc_oneshot_unit_handle_t adc1_handle;
|
||||
static int Bat_Adc_Value = 0;
|
||||
static adc_oneshot_unit_handle_t adc1_handle;
|
||||
static TaskHandle_t powerTaskHandle;
|
||||
|
||||
/*定义变量存储电池电压值*/
|
||||
static float Bat_Voltage_Value = 0;
|
||||
|
||||
void powerTask(void)
|
||||
{
|
||||
while (1)
|
||||
{
|
||||
ESP_ERROR_CHECK(adc_oneshot_read(adc1_handle, EXAMPLE_ADC1_CHAN8, &Bat_Adc_Value));
|
||||
|
||||
/*根据采样值计算电池电压*/
|
||||
Bat_Voltage_Value = 2 * (float)Bat_Adc_Value * 1.767 / 4095.0 + 2.3;
|
||||
vTaskDelay(pdMS_TO_TICKS(1000));
|
||||
|
||||
lv_bar_set_value(ui_Batinfo_BarBAT,Bat_Adc_Value*2,LV_ANIM_ON);
|
||||
lv_spinbox_set_value(ui_Batinfo_SpinboxBAT,Bat_Adc_Value*2);
|
||||
/*配置电池信息页显示*/
|
||||
lv_bar_set_value(ui_Batinfo_BarBAT,Bat_Adc_Value,LV_ANIM_ON);
|
||||
lv_spinbox_set_value(ui_Batinfo_SpinboxBAT,Bat_Adc_Value);
|
||||
|
||||
lv_label_set_text_fmt(ui_Batinfo_valueVoltage,"%.2fV",Bat_Voltage_Value);
|
||||
lv_label_set_text_fmt(ui_Batinfo_valueVolume,"%.0fmAh",Bat_Voltage_Value/4.2*2500);
|
||||
|
||||
/*设置Home页的显示电量*/
|
||||
lv_slider_set_value(ui_Home_SliderHeaderBat,Bat_Voltage_Value/4.2*100,LV_ANIM_ON);
|
||||
lv_label_set_text_fmt(ui_Home_LabelHeaderBatValue,"%.0f%%",Bat_Voltage_Value/4.2*100);
|
||||
|
||||
ESP_LOGI("dd","%d",Bat_Adc_Value);
|
||||
|
||||
printf("in powerTask the min free stack size is %ld \r\n", (int32_t)uxTaskGetStackHighWaterMark(NULL));
|
||||
}
|
||||
|
||||
}
|
||||
@ -42,11 +56,13 @@ void powerInit(void)
|
||||
|
||||
//-------------ADC1 Config---------------//
|
||||
adc_oneshot_chan_cfg_t config = {
|
||||
.bitwidth = ADC_BITWIDTH_DEFAULT,
|
||||
.atten = ADC_ATTEN_DB_11,
|
||||
.bitwidth = ADC_BITWIDTH_12,
|
||||
.atten = ADC_ATTEN_DB_6,
|
||||
};
|
||||
ESP_ERROR_CHECK(adc_oneshot_config_channel(adc1_handle, EXAMPLE_ADC1_CHAN8, &config));
|
||||
|
||||
xTaskCreate(powerTask,"powerTask",2*1024, NULL, 2, NULL);
|
||||
xTaskCreate(powerTask,"powerTask",4*1024, NULL, 2, &powerTaskHandle);
|
||||
|
||||
|
||||
|
||||
}
|
||||
|
||||
@ -60,7 +60,7 @@ dependencies:
|
||||
idf:
|
||||
source:
|
||||
type: idf
|
||||
version: 5.3.2
|
||||
version: 5.3.1
|
||||
lvgl/lvgl:
|
||||
component_hash: d7c1ac037ae6e85d94897f807d6e7ba0946a83e720074fc95a4f6241da9f9f53
|
||||
dependencies: []
|
||||
@ -71,7 +71,7 @@ dependencies:
|
||||
mb_example_common:
|
||||
dependencies: []
|
||||
source:
|
||||
path: D:\espidfEnv\v5.3.2\esp-idf\examples\protocols\modbus\mb_example_common
|
||||
path: C:\Espressif\frameworks\esp-idf-v5.3.1\examples\protocols\modbus\mb_example_common
|
||||
type: local
|
||||
version: '*'
|
||||
direct_dependencies:
|
||||
@ -80,6 +80,6 @@ direct_dependencies:
|
||||
- espressif/esp_lcd_touch_ft5x06
|
||||
- lvgl/lvgl
|
||||
- mb_example_common
|
||||
manifest_hash: 53662b48f2c071d39270339904304e42fe30509bdfe749beea1860fe6ff83816
|
||||
manifest_hash: 0fff3197c3b0c27c07156e90440cc8d3ca007929576e672eaab5aeb49473afc1
|
||||
target: esp32s3
|
||||
version: 2.0.0
|
||||
|
||||
@ -370,6 +370,8 @@ void app_main(void)
|
||||
{
|
||||
/*初始化FluxButton - 上电之后的第一件事*/
|
||||
button_init();
|
||||
/*拉起开机状态*/
|
||||
POWER_ON;
|
||||
|
||||
static lv_disp_draw_buf_t disp_buf; // contains internal graphic buffer(s) called draw buffer(s)
|
||||
static lv_disp_drv_t disp_drv; // contains callback functions
|
||||
|
||||
@ -4,5 +4,5 @@ dependencies:
|
||||
espressif/esp-modbus: ^1.0.13
|
||||
mb_example_common:
|
||||
path:
|
||||
D:\espidfEnv\v5.3.2\esp-idf/examples/protocols/modbus/mb_example_common
|
||||
C:/Espressif/frameworks/esp-idf-v5.3.1/examples/protocols/modbus/mb_example_common
|
||||
espressif/button: ^3.2.0
|
||||
|
||||
53
sdkconfig
53
sdkconfig
@ -1,6 +1,6 @@
|
||||
#
|
||||
# Automatically generated file. DO NOT EDIT.
|
||||
# Espressif IoT Development Framework (ESP-IDF) 5.3.2 Project Configuration
|
||||
# Espressif IoT Development Framework (ESP-IDF) 5.3.1 Project Configuration
|
||||
#
|
||||
CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
|
||||
CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
|
||||
@ -14,8 +14,6 @@ CONFIG_SOC_GDMA_SUPPORTED=y
|
||||
CONFIG_SOC_AHB_GDMA_SUPPORTED=y
|
||||
CONFIG_SOC_GPTIMER_SUPPORTED=y
|
||||
CONFIG_SOC_LCDCAM_SUPPORTED=y
|
||||
CONFIG_SOC_LCDCAM_I80_LCD_SUPPORTED=y
|
||||
CONFIG_SOC_LCDCAM_RGB_LCD_SUPPORTED=y
|
||||
CONFIG_SOC_MCPWM_SUPPORTED=y
|
||||
CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
|
||||
CONFIG_SOC_CACHE_SUPPORT_WRAP=y
|
||||
@ -121,7 +119,6 @@ CONFIG_SOC_GPIO_OUT_RANGE_MAX=48
|
||||
CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x0001FFFFFC000000
|
||||
CONFIG_SOC_GPIO_CLOCKOUT_BY_IO_MUX=y
|
||||
CONFIG_SOC_GPIO_CLOCKOUT_CHANNEL_NUM=3
|
||||
CONFIG_SOC_GPIO_SUPPORT_HOLD_IO_IN_DSLP=y
|
||||
CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM=8
|
||||
CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM=8
|
||||
CONFIG_SOC_DEDIC_GPIO_OUT_AUTO_ENABLE=y
|
||||
@ -192,10 +189,6 @@ CONFIG_SOC_LCD_RGB_PANELS=1
|
||||
CONFIG_SOC_LCD_I80_BUS_WIDTH=16
|
||||
CONFIG_SOC_LCD_RGB_DATA_WIDTH=16
|
||||
CONFIG_SOC_LCD_SUPPORT_RGB_YUV_CONV=y
|
||||
CONFIG_SOC_LCDCAM_I80_NUM_BUSES=1
|
||||
CONFIG_SOC_LCDCAM_I80_BUS_WIDTH=16
|
||||
CONFIG_SOC_LCDCAM_RGB_NUM_PANELS=1
|
||||
CONFIG_SOC_LCDCAM_RGB_DATA_WIDTH=16
|
||||
CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128
|
||||
CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=549
|
||||
CONFIG_SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH=128
|
||||
@ -338,7 +331,6 @@ CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
|
||||
CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y
|
||||
CONFIG_SOC_MEMSPI_TIMING_TUNING_BY_MSPI_DELAY=y
|
||||
CONFIG_SOC_MEMSPI_CORE_CLK_SHARED_WITH_PSRAM=y
|
||||
CONFIG_SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP=y
|
||||
CONFIG_SOC_COEX_HW_PTI=y
|
||||
CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE=y
|
||||
CONFIG_SOC_SDMMC_USE_GPIO_MATRIX=y
|
||||
@ -366,7 +358,7 @@ CONFIG_IDF_TOOLCHAIN="gcc"
|
||||
CONFIG_IDF_TARGET_ARCH_XTENSA=y
|
||||
CONFIG_IDF_TARGET_ARCH="xtensa"
|
||||
CONFIG_IDF_TARGET="esp32s3"
|
||||
CONFIG_IDF_INIT_VERSION="5.3.2"
|
||||
CONFIG_IDF_INIT_VERSION="5.3.1"
|
||||
CONFIG_IDF_TARGET_ESP32S3=y
|
||||
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009
|
||||
|
||||
@ -710,7 +702,6 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
|
||||
#
|
||||
CONFIG_ESP_COEX_ENABLED=y
|
||||
# CONFIG_ESP_COEX_EXTERNAL_COEXIST_ENABLE is not set
|
||||
# CONFIG_ESP_COEX_GPIO_DEBUG is not set
|
||||
# end of Wireless Coexistence
|
||||
|
||||
#
|
||||
@ -901,12 +892,6 @@ CONFIG_ESP_REV_MIN_FULL=0
|
||||
#
|
||||
CONFIG_ESP32S3_REV_MAX_FULL=99
|
||||
CONFIG_ESP_REV_MAX_FULL=99
|
||||
CONFIG_ESP_EFUSE_BLOCK_REV_MIN_FULL=0
|
||||
CONFIG_ESP_EFUSE_BLOCK_REV_MAX_FULL=199
|
||||
|
||||
#
|
||||
# Maximum Supported ESP32-S3 eFuse Block Revision (eFuse Block Rev v1.99)
|
||||
#
|
||||
# end of Chip revision
|
||||
|
||||
#
|
||||
@ -983,6 +968,7 @@ CONFIG_ESP_SPI_BUS_LOCK_ISR_FUNCS_IN_IRAM=y
|
||||
#
|
||||
# LCD Peripheral Configuration
|
||||
#
|
||||
CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
|
||||
# CONFIG_LCD_ENABLE_DEBUG_LOG is not set
|
||||
# CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set
|
||||
# CONFIG_LCD_RGB_RESTART_IN_VSYNC is not set
|
||||
@ -999,7 +985,6 @@ CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y
|
||||
# CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set
|
||||
# CONFIG_ESP_NETIF_L2_TAP is not set
|
||||
# CONFIG_ESP_NETIF_BRIDGE_EN is not set
|
||||
# CONFIG_ESP_NETIF_SET_DNS_PER_DEFAULT_NETIF is not set
|
||||
# end of ESP NETIF Adapter
|
||||
|
||||
#
|
||||
@ -1029,7 +1014,6 @@ CONFIG_ESP_PHY_CALIBRATION_MODE=0
|
||||
# Power Management
|
||||
#
|
||||
# CONFIG_PM_ENABLE is not set
|
||||
# CONFIG_PM_SLP_IRAM_OPT is not set
|
||||
CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
|
||||
CONFIG_PM_RESTORE_CACHE_TAGMEM_AFTER_LIGHT_SLEEP=y
|
||||
# end of Power Management
|
||||
@ -1067,7 +1051,6 @@ CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
|
||||
# CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP is not set
|
||||
CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
|
||||
# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
|
||||
# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
|
||||
# end of SPI RAM config
|
||||
# end of ESP PSRAM
|
||||
|
||||
@ -1141,7 +1124,7 @@ CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK=y
|
||||
|
||||
CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
|
||||
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
|
||||
CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
|
||||
CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096
|
||||
CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
|
||||
# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
|
||||
# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
|
||||
@ -1408,7 +1391,6 @@ CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
|
||||
CONFIG_HAL_WDT_USE_ROM_IMPL=y
|
||||
CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y
|
||||
CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y
|
||||
# CONFIG_HAL_ECDSA_GEN_SIG_CM is not set
|
||||
# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
|
||||
|
||||
#
|
||||
@ -1555,9 +1537,6 @@ CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
|
||||
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
|
||||
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
|
||||
CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
|
||||
CONFIG_LWIP_IPV6_ND6_NUM_PREFIXES=5
|
||||
CONFIG_LWIP_IPV6_ND6_NUM_ROUTERS=3
|
||||
CONFIG_LWIP_IPV6_ND6_NUM_DESTINATIONS=10
|
||||
# CONFIG_LWIP_PPP_SUPPORT is not set
|
||||
CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
|
||||
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
|
||||
@ -1590,10 +1569,8 @@ CONFIG_LWIP_SNTP_MAXIMUM_STARTUP_DELAY=5000
|
||||
#
|
||||
# DNS
|
||||
#
|
||||
CONFIG_LWIP_DNS_MAX_HOST_IP=1
|
||||
CONFIG_LWIP_DNS_MAX_SERVERS=3
|
||||
# CONFIG_LWIP_FALLBACK_DNS_SERVER_SUPPORT is not set
|
||||
# CONFIG_LWIP_DNS_SETSERVER_WITH_NETIF is not set
|
||||
# end of DNS
|
||||
|
||||
CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7
|
||||
@ -1617,8 +1594,6 @@ CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y
|
||||
CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
|
||||
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
|
||||
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
|
||||
CONFIG_LWIP_HOOK_DNS_EXT_RESOLVE_NONE=y
|
||||
# CONFIG_LWIP_HOOK_DNS_EXT_RESOLVE_CUSTOM is not set
|
||||
# CONFIG_LWIP_HOOK_IP6_INPUT_NONE is not set
|
||||
CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT=y
|
||||
# CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set
|
||||
@ -1682,7 +1657,6 @@ CONFIG_MBEDTLS_HAVE_TIME=y
|
||||
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
|
||||
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
|
||||
CONFIG_MBEDTLS_SHA512_C=y
|
||||
# CONFIG_MBEDTLS_SHA3_C is not set
|
||||
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
|
||||
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
|
||||
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
|
||||
@ -1759,7 +1733,6 @@ CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
|
||||
# CONFIG_MBEDTLS_HKDF_C is not set
|
||||
# CONFIG_MBEDTLS_THREADING_C is not set
|
||||
CONFIG_MBEDTLS_ERROR_STRINGS=y
|
||||
CONFIG_MBEDTLS_FS_IO=y
|
||||
# end of mbedTLS
|
||||
|
||||
#
|
||||
@ -1887,7 +1860,6 @@ CONFIG_SPI_FLASH_HPM_DC_AUTO=y
|
||||
CONFIG_SPI_FLASH_SUSPEND_QVL_SUPPORTED=y
|
||||
# CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
|
||||
CONFIG_SPI_FLASH_SUSPEND_TSUS_VAL_US=50
|
||||
# CONFIG_SPI_FLASH_FORCE_ENABLE_XMC_C_SUSPEND is not set
|
||||
# end of Optional and Experimental Features (READ DOCS FIRST)
|
||||
# end of Main Flash configuration
|
||||
|
||||
@ -2013,22 +1985,16 @@ CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y
|
||||
# CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT is not set
|
||||
|
||||
#
|
||||
# Hub Driver Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Root Port configuration
|
||||
# Root Hub configuration
|
||||
#
|
||||
CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250
|
||||
CONFIG_USB_HOST_RESET_HOLD_MS=30
|
||||
CONFIG_USB_HOST_RESET_RECOVERY_MS=30
|
||||
CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10
|
||||
# end of Root Port configuration
|
||||
|
||||
# CONFIG_USB_HOST_HUBS_SUPPORTED is not set
|
||||
# end of Hub Driver Configuration
|
||||
# end of Root Hub configuration
|
||||
|
||||
# CONFIG_USB_HOST_ENABLE_ENUM_FILTER_CALLBACK is not set
|
||||
# CONFIG_USB_HOST_EXT_HUB_SUPPORT is not set
|
||||
CONFIG_USB_OTG_SUPPORTED=y
|
||||
# end of USB-OTG
|
||||
|
||||
@ -2063,6 +2029,7 @@ CONFIG_WL_SECTOR_SIZE=4096
|
||||
#
|
||||
CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
|
||||
CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
|
||||
# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
|
||||
CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
|
||||
# CONFIG_WIFI_PROV_STA_FAST_SCAN is not set
|
||||
# end of Wi-Fi Provisioning Manager
|
||||
@ -2225,7 +2192,7 @@ CONFIG_LV_ASSERT_HANDLER_INCLUDE="assert.h"
|
||||
# CONFIG_LV_USE_PERF_MONITOR is not set
|
||||
# CONFIG_LV_USE_REFR_DEBUG is not set
|
||||
# CONFIG_LV_SPRINTF_CUSTOM is not set
|
||||
# CONFIG_LV_SPRINTF_USE_FLOAT is not set
|
||||
CONFIG_LV_SPRINTF_USE_FLOAT=y
|
||||
CONFIG_LV_USE_USER_DATA=y
|
||||
# CONFIG_LV_ENABLE_GC is not set
|
||||
# end of Others
|
||||
@ -2508,7 +2475,7 @@ CONFIG_ESP32S3_DEFAULT_CPU_FREQ_160=y
|
||||
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ=160
|
||||
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
|
||||
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
|
||||
CONFIG_MAIN_TASK_STACK_SIZE=3584
|
||||
CONFIG_MAIN_TASK_STACK_SIZE=4096
|
||||
CONFIG_CONSOLE_UART_DEFAULT=y
|
||||
# CONFIG_CONSOLE_UART_CUSTOM is not set
|
||||
# CONFIG_CONSOLE_UART_NONE is not set
|
||||
|
||||
Loading…
Reference in New Issue
Block a user