成功实现电池电量管理部分

.vscode/settings.json

@@ -1,8 +1,8 @@
 {
     "C_Cpp.intelliSenseEngine": "default",
-    "idf.espIdfPathWin": "d:\\espidfEnv\\v5.3.2\\esp-idf",
+    "idf.espIdfPathWin": "C:/Espressif/frameworks/esp-idf-v5.3.1/",
-    "idf.toolsPathWin": "d:\\Espressif",
+    "idf.toolsPathWin": "C:\\Espressif",
-    "idf.pythonInstallPath": "d:\\Espressif\\tools\\idf-python\\3.11.2\\python.exe",
+    "idf.pythonInstallPath": "C:\\Espressif\\tools\\idf-python\\3.11.2\\python.exe",
     "idf.customExtraVars": {
         "OPENOCD_SCRIPTS": "d:\\Espressif\\tools\\openocd-esp32\\v0.12.0-esp32-20240318/openocd-esp32/share/openocd/scripts",
         "IDF_CCACHE_ENABLE": "1",
@@ -12,7 +12,7 @@
     "idf.openOcdConfigs": [
         "board/esp32s3-builtin.cfg"
     ],
-    "idf.portWin": "COM5",
+    "idf.portWin": "COM6",
     "idf.flashType": "UART",
     "files.associations": {
         "ledc.h": "c",

components/FluxButton/FluxButton.c

@@ -38,10 +38,10 @@ static void button_event_cb(void *arg, void *data)
     {
     case BUTTON_CMD_POWER_ON:
         /*响应电源键按下事件*/
-        gpio_set_level(BUTTON_PowerOut_IO_NUM, POWER_ON_OUT_LEVEL);
+        POWER_ON;
         break;
     case BUTTON_CMD_POWER_OFF:
-        gpio_set_level(BUTTON_PowerOut_IO_NUM, POWER_OFF_OUT_LEVEL);
+        POWER_OFF;
         break;
 
     case BUTTON_CMD_CENTER_KEY:

components/FluxButton/FluxButton.h

@@ -16,6 +16,9 @@
 #define BUTTON_ACTIVE_LEVEL         0
 #define BUTTON_POWERIN_ACTIVE_LEVEL 1
 
+#define POWER_OFF   gpio_set_level(BUTTON_PowerOut_IO_NUM, POWER_OFF_OUT_LEVEL);
+#define POWER_ON    gpio_set_level(BUTTON_PowerOut_IO_NUM, POWER_ON_OUT_LEVEL);
+
 /*¶¨Òå°´¼ü¿ØÖÆÖ¸ÁîÂë*/
 enum button_cmd_t
 {

components/FluxMod/CMakeLists.txt

@@ -1,3 +1,3 @@
 idf_component_register(SRCS "FluxMod.c"
                     REQUIRES espressif__esp-modbus
-                    INCLUDE_DIRS "." "D:/espidfEnv/v5.3.2/esp-idf/examples/protocols/modbus/mb_example_common/include")
+                    INCLUDE_DIRS "." "C:/Espressif/frameworks/esp-idf-v5.3.1/examples/protocols/modbus/mb_example_common/include")

components/FluxPower/FluxPower.c

@@ -8,25 +8,39 @@ extern lv_obj_t * ui_Batinfo_valueVolume;
 extern lv_obj_t * ui_Batinfo_SpinboxBAT;
 extern lv_obj_t * ui_Batinfo_BarBAT;
 extern lv_obj_t * ui_Home_LabelHeaderBatValue;
-
+extern lv_obj_t * ui_Home_SliderHeaderBat;
 
 /*没有返回值的电源管理任务*/
-int Bat_Adc_Value = 0;
+static int Bat_Adc_Value = 0;
-adc_oneshot_unit_handle_t adc1_handle;
+static adc_oneshot_unit_handle_t adc1_handle;
+static TaskHandle_t powerTaskHandle;
 
+/*定义变量存储电池电压值*/
+static float Bat_Voltage_Value = 0;
 
 void powerTask(void)
 {   
     while (1)
     {
         ESP_ERROR_CHECK(adc_oneshot_read(adc1_handle, EXAMPLE_ADC1_CHAN8, &Bat_Adc_Value));
-        
+        /*根据采样值计算电池电压*/
+        Bat_Voltage_Value = 2 * (float)Bat_Adc_Value * 1.767 / 4095.0 + 2.3;
         vTaskDelay(pdMS_TO_TICKS(1000));
 
-        lv_bar_set_value(ui_Batinfo_BarBAT,Bat_Adc_Value*2,LV_ANIM_ON);
+        /*配置电池信息页显示*/
-        lv_spinbox_set_value(ui_Batinfo_SpinboxBAT,Bat_Adc_Value*2);
+        lv_bar_set_value(ui_Batinfo_BarBAT,Bat_Adc_Value,LV_ANIM_ON);
+        lv_spinbox_set_value(ui_Batinfo_SpinboxBAT,Bat_Adc_Value);
+
+        lv_label_set_text_fmt(ui_Batinfo_valueVoltage,"%.2fV",Bat_Voltage_Value);
+        lv_label_set_text_fmt(ui_Batinfo_valueVolume,"%.0fmAh",Bat_Voltage_Value/4.2*2500);
+
+        /*设置Home页的显示电量*/
+        lv_slider_set_value(ui_Home_SliderHeaderBat,Bat_Voltage_Value/4.2*100,LV_ANIM_ON);
+        lv_label_set_text_fmt(ui_Home_LabelHeaderBatValue,"%.0f%%",Bat_Voltage_Value/4.2*100);
 
         ESP_LOGI("dd","%d",Bat_Adc_Value);
+
+        printf("in powerTask the min free stack size is %ld \r\n", (int32_t)uxTaskGetStackHighWaterMark(NULL));
     }
 
 }
@@ -42,11 +56,13 @@ void powerInit(void)
 
     //-------------ADC1 Config---------------//
     adc_oneshot_chan_cfg_t config = {
-        .bitwidth = ADC_BITWIDTH_DEFAULT,
+        .bitwidth = ADC_BITWIDTH_12,
-        .atten = ADC_ATTEN_DB_11,
+        .atten = ADC_ATTEN_DB_6,
     };
     ESP_ERROR_CHECK(adc_oneshot_config_channel(adc1_handle, EXAMPLE_ADC1_CHAN8, &config));
 
-    xTaskCreate(powerTask,"powerTask",2*1024, NULL, 2, NULL);
+    xTaskCreate(powerTask,"powerTask",4*1024, NULL, 2, &powerTaskHandle);
+
+    
 
 }

dependencies.lock

@@ -60,7 +60,7 @@ dependencies:
   idf:
     source:
       type: idf
-    version: 5.3.2
+    version: 5.3.1
   lvgl/lvgl:
     component_hash: d7c1ac037ae6e85d94897f807d6e7ba0946a83e720074fc95a4f6241da9f9f53
     dependencies: []
@@ -71,7 +71,7 @@ dependencies:
   mb_example_common:
     dependencies: []
     source:
-      path: D:\espidfEnv\v5.3.2\esp-idf\examples\protocols\modbus\mb_example_common
+      path: C:\Espressif\frameworks\esp-idf-v5.3.1\examples\protocols\modbus\mb_example_common
       type: local
     version: '*'
 direct_dependencies:
@@ -80,6 +80,6 @@ direct_dependencies:
 - espressif/esp_lcd_touch_ft5x06
 - lvgl/lvgl
 - mb_example_common
-manifest_hash: 53662b48f2c071d39270339904304e42fe30509bdfe749beea1860fe6ff83816
+manifest_hash: 0fff3197c3b0c27c07156e90440cc8d3ca007929576e672eaab5aeb49473afc1
 target: esp32s3
 version: 2.0.0

main/i80_controller_example_main.c

@@ -370,6 +370,8 @@ void app_main(void)
 {
     /*初始化FluxButton - 上电之后的第一件事*/
     button_init();
+    /*拉起开机状态*/
+    POWER_ON;
 
     static lv_disp_draw_buf_t disp_buf; // contains internal graphic buffer(s) called draw buffer(s)
     static lv_disp_drv_t disp_drv;      // contains callback functions

main/idf_component.yml

@@ -4,5 +4,5 @@ dependencies:
   espressif/esp-modbus: ^1.0.13
   mb_example_common:
     path: 
-      D:\espidfEnv\v5.3.2\esp-idf/examples/protocols/modbus/mb_example_common
+      C:/Espressif/frameworks/esp-idf-v5.3.1/examples/protocols/modbus/mb_example_common
   espressif/button: ^3.2.0

sdkconfig

@@ -1,6 +1,6 @@
 #
 # Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) 5.3.2 Project Configuration
+# Espressif IoT Development Framework (ESP-IDF) 5.3.1 Project Configuration
 #
 CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
 CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
@@ -14,8 +14,6 @@ CONFIG_SOC_GDMA_SUPPORTED=y
 CONFIG_SOC_AHB_GDMA_SUPPORTED=y
 CONFIG_SOC_GPTIMER_SUPPORTED=y
 CONFIG_SOC_LCDCAM_SUPPORTED=y
-CONFIG_SOC_LCDCAM_I80_LCD_SUPPORTED=y
-CONFIG_SOC_LCDCAM_RGB_LCD_SUPPORTED=y
 CONFIG_SOC_MCPWM_SUPPORTED=y
 CONFIG_SOC_DEDICATED_GPIO_SUPPORTED=y
 CONFIG_SOC_CACHE_SUPPORT_WRAP=y
@@ -121,7 +119,6 @@ CONFIG_SOC_GPIO_OUT_RANGE_MAX=48
 CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0x0001FFFFFC000000
 CONFIG_SOC_GPIO_CLOCKOUT_BY_IO_MUX=y
 CONFIG_SOC_GPIO_CLOCKOUT_CHANNEL_NUM=3
-CONFIG_SOC_GPIO_SUPPORT_HOLD_IO_IN_DSLP=y
 CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM=8
 CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM=8
 CONFIG_SOC_DEDIC_GPIO_OUT_AUTO_ENABLE=y
@@ -192,10 +189,6 @@ CONFIG_SOC_LCD_RGB_PANELS=1
 CONFIG_SOC_LCD_I80_BUS_WIDTH=16
 CONFIG_SOC_LCD_RGB_DATA_WIDTH=16
 CONFIG_SOC_LCD_SUPPORT_RGB_YUV_CONV=y
-CONFIG_SOC_LCDCAM_I80_NUM_BUSES=1
-CONFIG_SOC_LCDCAM_I80_BUS_WIDTH=16
-CONFIG_SOC_LCDCAM_RGB_NUM_PANELS=1
-CONFIG_SOC_LCDCAM_RGB_DATA_WIDTH=16
 CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH=128
 CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM=549
 CONFIG_SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH=128
@@ -338,7 +331,6 @@ CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
 CONFIG_SOC_SPI_MEM_SUPPORT_WRAP=y
 CONFIG_SOC_MEMSPI_TIMING_TUNING_BY_MSPI_DELAY=y
 CONFIG_SOC_MEMSPI_CORE_CLK_SHARED_WITH_PSRAM=y
-CONFIG_SOC_SPI_MEM_SUPPORT_CACHE_32BIT_ADDR_MAP=y
 CONFIG_SOC_COEX_HW_PTI=y
 CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE=y
 CONFIG_SOC_SDMMC_USE_GPIO_MATRIX=y
@@ -366,7 +358,7 @@ CONFIG_IDF_TOOLCHAIN="gcc"
 CONFIG_IDF_TARGET_ARCH_XTENSA=y
 CONFIG_IDF_TARGET_ARCH="xtensa"
 CONFIG_IDF_TARGET="esp32s3"
-CONFIG_IDF_INIT_VERSION="5.3.2"
+CONFIG_IDF_INIT_VERSION="5.3.1"
 CONFIG_IDF_TARGET_ESP32S3=y
 CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009
 
@@ -710,7 +702,6 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
 #
 CONFIG_ESP_COEX_ENABLED=y
 # CONFIG_ESP_COEX_EXTERNAL_COEXIST_ENABLE is not set
-# CONFIG_ESP_COEX_GPIO_DEBUG is not set
 # end of Wireless Coexistence
 
 #
@@ -901,12 +892,6 @@ CONFIG_ESP_REV_MIN_FULL=0
 #
 CONFIG_ESP32S3_REV_MAX_FULL=99
 CONFIG_ESP_REV_MAX_FULL=99
-CONFIG_ESP_EFUSE_BLOCK_REV_MIN_FULL=0
-CONFIG_ESP_EFUSE_BLOCK_REV_MAX_FULL=199
-
-#
-# Maximum Supported ESP32-S3 eFuse Block Revision (eFuse Block Rev v1.99)
-#
 # end of Chip revision
 
 #
@@ -983,6 +968,7 @@ CONFIG_ESP_SPI_BUS_LOCK_ISR_FUNCS_IN_IRAM=y
 #
 # LCD Peripheral Configuration
 #
+CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
 # CONFIG_LCD_ENABLE_DEBUG_LOG is not set
 # CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set
 # CONFIG_LCD_RGB_RESTART_IN_VSYNC is not set
@@ -999,7 +985,6 @@ CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y
 # CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set
 # CONFIG_ESP_NETIF_L2_TAP is not set
 # CONFIG_ESP_NETIF_BRIDGE_EN is not set
-# CONFIG_ESP_NETIF_SET_DNS_PER_DEFAULT_NETIF is not set
 # end of ESP NETIF Adapter
 
 #
@@ -1029,7 +1014,6 @@ CONFIG_ESP_PHY_CALIBRATION_MODE=0
 # Power Management
 #
 # CONFIG_PM_ENABLE is not set
-# CONFIG_PM_SLP_IRAM_OPT is not set
 CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=y
 CONFIG_PM_RESTORE_CACHE_TAGMEM_AFTER_LIGHT_SLEEP=y
 # end of Power Management
@@ -1067,7 +1051,6 @@ CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384
 # CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP is not set
 CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
 # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
-# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
 # end of SPI RAM config
 # end of ESP PSRAM
 
@@ -1141,7 +1124,7 @@ CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK=y
 
 CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096
 CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
 # CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
 # CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
@@ -1408,7 +1391,6 @@ CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
 CONFIG_HAL_WDT_USE_ROM_IMPL=y
 CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y
 CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y
-# CONFIG_HAL_ECDSA_GEN_SIG_CM is not set
 # end of Hardware Abstraction Layer (HAL) and Low Level (LL)
 
 #
@@ -1555,9 +1537,6 @@ CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
-CONFIG_LWIP_IPV6_ND6_NUM_PREFIXES=5
-CONFIG_LWIP_IPV6_ND6_NUM_ROUTERS=3
-CONFIG_LWIP_IPV6_ND6_NUM_DESTINATIONS=10
 # CONFIG_LWIP_PPP_SUPPORT is not set
 CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
 CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
@@ -1590,10 +1569,8 @@ CONFIG_LWIP_SNTP_MAXIMUM_STARTUP_DELAY=5000
 #
 # DNS
 #
-CONFIG_LWIP_DNS_MAX_HOST_IP=1
 CONFIG_LWIP_DNS_MAX_SERVERS=3
 # CONFIG_LWIP_FALLBACK_DNS_SERVER_SUPPORT is not set
-# CONFIG_LWIP_DNS_SETSERVER_WITH_NETIF is not set
 # end of DNS
 
 CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7
@@ -1617,8 +1594,6 @@ CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y
 CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
 # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
 # CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
-CONFIG_LWIP_HOOK_DNS_EXT_RESOLVE_NONE=y
-# CONFIG_LWIP_HOOK_DNS_EXT_RESOLVE_CUSTOM is not set
 # CONFIG_LWIP_HOOK_IP6_INPUT_NONE is not set
 CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT=y
 # CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set
@@ -1682,7 +1657,6 @@ CONFIG_MBEDTLS_HAVE_TIME=y
 # CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
 CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
 CONFIG_MBEDTLS_SHA512_C=y
-# CONFIG_MBEDTLS_SHA3_C is not set
 CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
 # CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
 # CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
@@ -1759,7 +1733,6 @@ CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
 # CONFIG_MBEDTLS_HKDF_C is not set
 # CONFIG_MBEDTLS_THREADING_C is not set
 CONFIG_MBEDTLS_ERROR_STRINGS=y
-CONFIG_MBEDTLS_FS_IO=y
 # end of mbedTLS
 
 #
@@ -1887,7 +1860,6 @@ CONFIG_SPI_FLASH_HPM_DC_AUTO=y
 CONFIG_SPI_FLASH_SUSPEND_QVL_SUPPORTED=y
 # CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
 CONFIG_SPI_FLASH_SUSPEND_TSUS_VAL_US=50
-# CONFIG_SPI_FLASH_FORCE_ENABLE_XMC_C_SUSPEND is not set
 # end of Optional and Experimental Features (READ DOCS FIRST)
 # end of Main Flash configuration
 
@@ -2013,22 +1985,16 @@ CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y
 # CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT is not set
 
 #
-# Hub Driver Configuration
+# Root Hub configuration
-#
-
-#
-# Root Port configuration
 #
 CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250
 CONFIG_USB_HOST_RESET_HOLD_MS=30
 CONFIG_USB_HOST_RESET_RECOVERY_MS=30
 CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10
-# end of Root Port configuration
+# end of Root Hub configuration
-
-# CONFIG_USB_HOST_HUBS_SUPPORTED is not set
-# end of Hub Driver Configuration
 
 # CONFIG_USB_HOST_ENABLE_ENUM_FILTER_CALLBACK is not set
+# CONFIG_USB_HOST_EXT_HUB_SUPPORT is not set
 CONFIG_USB_OTG_SUPPORTED=y
 # end of USB-OTG
 
@@ -2063,6 +2029,7 @@ CONFIG_WL_SECTOR_SIZE=4096
 #
 CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
 CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
+# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
 CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
 # CONFIG_WIFI_PROV_STA_FAST_SCAN is not set
 # end of Wi-Fi Provisioning Manager
@@ -2225,7 +2192,7 @@ CONFIG_LV_ASSERT_HANDLER_INCLUDE="assert.h"
 # CONFIG_LV_USE_PERF_MONITOR is not set
 # CONFIG_LV_USE_REFR_DEBUG is not set
 # CONFIG_LV_SPRINTF_CUSTOM is not set
-# CONFIG_LV_SPRINTF_USE_FLOAT is not set
+CONFIG_LV_SPRINTF_USE_FLOAT=y
 CONFIG_LV_USE_USER_DATA=y
 # CONFIG_LV_ENABLE_GC is not set
 # end of Others
@@ -2508,7 +2475,7 @@ CONFIG_ESP32S3_DEFAULT_CPU_FREQ_160=y
 CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ=160
 CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
-CONFIG_MAIN_TASK_STACK_SIZE=3584
+CONFIG_MAIN_TASK_STACK_SIZE=4096
 CONFIG_CONSOLE_UART_DEFAULT=y
 # CONFIG_CONSOLE_UART_CUSTOM is not set
 # CONFIG_CONSOLE_UART_NONE is not set