FluxDC/components/FluxUI/ui_events.c

/**
 * @file ui_event.c
 * @brief 此文件中专门实现事件的处理
 * 
 * @author wang xiang en
 * @date 2025-04-19
 * @version 版本号
 * @copyright 版权声明（(C)2025, YUWELL MEDTECH Co.ltd）
 */
#include "ui.h"
#include "driver/ledc.h"
#include "esp_err.h"
#include "esp_log.h"

#include "FluxWifi.h"
#include "FluxUart.h"
#include "FluxSD.h"

#include "esp_vfs_fat.h"
#include "sdmmc_cmd.h"
#include "driver/sdmmc_host.h"

#include "FluxProtocol.h"

#include "Flux_Button.h"

#if CONFIG_WIFI_SCAN_ENABLE

/*包含SNTP的头文件*/
#include "lwip/apps/sntp.h"

#endif

/**
 * @brief 更改测试的设备类型
 *
 * 设备类型选择回调函数
 * 
 * @param[in] e 设置页的设备下拉菜单
 */
void on_dropdownDeviceType_valueChanged(lv_event_t * e)
{
	char buf[32]={};
	uint16_t index = lv_dropdown_get_selected(e->target);

	/* 更新SD卡中的数据存储 */
	sdData.flux_test_result.current_device_type = index;

	lv_dropdown_get_selected_str(e->target,buf,32);
	lv_label_set_text(ui_pageHome_labelTitle, buf);

	if (index == Spirit3)		
	{
		lv_spinbox_set_range(ui_pageHome_spinboxStage,1,4);
	}else{
		lv_spinbox_set_range(ui_pageHome_spinboxStage,1,6);
	}

#if LOG_RECORD_ENABLE
    example_write_log("on_dropdownDeviceType_valueChanged 设备类型修改成功");
#endif	

}

/**
 * @brief 读取当前SD卡剩余空间信息并更新页面
 *
 * SD卡读取回调函数
 * 
 * @param[in] e not used
 */
void on_buttonReadSDCard_clicked(lv_event_t * e)
{
	/*首先清空显示页面*/
	lv_textarea_set_text(ui_pageSDCard_textAreaSDCard,"");
    esp_vfs_fat_info(MOUNT_POINT,&sdData.total_bytes,&sdData.free_bytes);
    sdData.free_percent = (float)sdData.free_bytes / (float)sdData.total_bytes * 100;

	printf("total:%llu free:%llu\n",sdData.total_bytes,sdData.free_bytes);

	lv_label_set_text_fmt(ui_pageSDCard_labelSDCardFree,"%.2f free",sdData.free_percent);
	lv_label_set_text_fmt(ui_pageSDCard_labelSDCardUsed,"used: %.2f GB",(double)(sdData.total_bytes-sdData.free_bytes)/(1024*1024*1024.0));
	lv_label_set_text_fmt(ui_pageSDCard_labelSDCardSize,"size: %.2f GB",(double)sdData.total_bytes/(1024*1024*1024.0));

	lv_arc_set_value(ui_pageSDCard_arcSDCardFree,sdData.free_percent);

}

/**
 * @brief pageFluxRead 向流量计索要120个参数
 *
 * 获取当前流量数据
 * 
 * @param[in] e not used
 */
void on_buttonReadFlux_clicked(lv_event_t * e)
{
	/*下发数据获取指令*/
    /* 起始地址为 0x00 */
    flux_frame.DATA[0] = 0;
	flux_frame.DATA[1] = 0;

    /* 数据长度为 120 */
    flux_frame.DATA[2] = 0;
	flux_frame.DATA[3] = 120;
	flux_frame.FUNC = FLUX_FUNC_READ;

	/*下发问询120个参数*/
	ESP_ERROR_CHECK(ModbusRTU_Send_0306(ECHO_UART_PORT_NUM1,&flux_frame));

}


/*更新测试结果 —— 功能已屏蔽*/
void on_labelTestVolume_valueChanged(lv_event_t * e)
{
	#if 0
	/* 测试结果刷新放到label更新函数中 */
	RefreshResult();
	#endif
}

/*更新工作模式 —— 功能已屏蔽*/
void on_dropDownWorkmode_valueChanged(lv_event_t * e)
{
	#if 0
	FluxMachineData.workMode = (enum FluxMachineWorkMode)lv_dropdown_get_selected(e->target);
	#endif
}

/*向流量计下发计时时间*/
void on_spinboxTime_valueChanged(lv_event_t * e)
{
	#if 0
	/* 0x10 设置多个参数报文格式 */
	/* 地址 功能码 起始地址 寄存器数量 字节计数（写入寄存器数量*2） 数据1   数据2 。。。 CRC	*/
	/* 0x01 0x10  0x00 02  0x00 02    0x04                     0x0078  0x0077 CRC*/

	/*下发配置参数（其实只是配置时间）*/
	flux_frame2Reg.ADDR = FLUX_ADDR;
	flux_frame2Reg.FUNC = FLUX_FUNC_SET;

	/*时间寄存器起始地址*/
	flux_frame2Reg.regAddr = 0x0002;
	flux_frame2Reg.regNum = 0x0002;

	flux_frame2Reg.ByteNum = 0x04;

	/*将时间的浮点数转为字节数组*/
	uint8_t bytes[4];
	float time = (float)lv_spinbox_get_value(e->target);
	memcpy(bytes, &time, 4);

	ESP_LOGI("FluxProtocol", "time:%f", time);
	ESP_LOGI("FluxProtocol", "time:0-%02x 1-%02x 2-%02x 3-%02x", bytes[0],bytes[1],bytes[2],bytes[3]);

	flux_frame2Reg.DATA[0] = bytes[3];
	flux_frame2Reg.DATA[1] = bytes[2];
	flux_frame2Reg.DATA[2] = bytes[1];
	flux_frame2Reg.DATA[3] = bytes[0];

	ESP_ERROR_CHECK(ModbusRTU_Send_0x10(ECHO_UART_PORT_NUM1,&flux_frame2Reg));
	#elif 0
	/*使用0306报文格式*/
	uint8_t bytes[4];
	float time = (float)lv_spinbox_get_value(ui_pageFluxRead_spinboxTime);
	memcpy(bytes, &time, 4);

	/*下发命令*/
	flux_frame.ADDR = FLUX_ADDR;
	flux_frame.FUNC = FLUX_FUNC_SET_SINGLE;

	flux_frame.DATA[0] = 0x00;
	flux_frame.DATA[1] = 0x02;
	flux_frame.DATA[2] = bytes[3];
	flux_frame.DATA[3] = bytes[2];

	ESP_ERROR_CHECK(ModbusRTU_Send_0306(ECHO_UART_PORT_NUM1,&flux_frame));

	#endif
}


/**
 * @brief pageFlux页面中 启动按键（Not Used）
 *
 * 启动流量计 开始测试
 * 
 * @param[in] e not used
 */
void on_buttonFluxStart_clicked(lv_event_t * e)
{
	FLUX_TEST_START;
}

/*不执行任何操作*/
void on_buttonTimeUpdate_clicked(lv_event_t * e)
{
	/*不实现任何功能*/
}

void on_buttonForceShutOFF_Clicked(lv_event_t * e)
{
	/* 一键关机 */
	POWER_OFF;
}

void on_switchShutOff_valueChanged(lv_event_t * e)
{
	/* 关机开关 */
	POWER_OFF;
}