DockerFluxDC/components/user_i80_display/user_i80_display.c

/**
 * @file user_i80_display.c
 * @brief LCD及触摸屏控制函数实现
 * 
 * 用于实现LCD控制IO及初始化函数
 * 
 * @author wang xiang en
 * @date 2025-04-18
 * @version 版本号
 * @copyright 版权声明（(C)2025, YUWELL MEDTECH Co.ltd）
 */
#include "user_i80_display.h"


/* 用于初始化配置的全局变量 */
static esp_lcd_touch_handle_t tp = NULL;
static SemaphoreHandle_t lvgl_mux = NULL;
static const char *TAG = "LCD_Init";

/* 用于初始化配置的全局变量 */
static lv_disp_draw_buf_t disp_buf; // Contains internal graphic buffer(s) called draw buffer(s)
static lv_disp_drv_t disp_drv;      // Contains callback functions

/**
 * @brief 通知LVGL库，屏幕已经更新
 *
 * 屏幕刷新时，LVGL库不会自动通知屏幕已经更新，需要手动调用此函数通知LVGL库，屏幕已经更新。
 * 
 * @param[in] panel_io lcd控制面板
 * @param[in] edata 事件码
 * @param[in] user_ctx 用户数据
 * 
 * @return 成功返回0，失败返回错误码
 */
static bool example_notify_lvgl_flush_ready(esp_lcd_panel_io_handle_t panel_io, esp_lcd_panel_io_event_data_t *edata, void *user_ctx)
{
    lv_disp_drv_t *disp_driver = (lv_disp_drv_t *)user_ctx;
    lv_disp_flush_ready(disp_driver);
    return false;
}



/**
 * @brief 刷新屏幕
 *
 * 使用lcd驱动进行屏幕内容刷新
 * 
 * @param[in] drv lcd控制驱动
 * @param[in] area 绘图区域
 * @param[in] color_map 色谱
 * 
 */
static void example_lvgl_flush_cb(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map)
{
    esp_lcd_panel_handle_t panel_handle = (esp_lcd_panel_handle_t) drv->user_data;
    int offsetx1 = area->x1;
    int offsetx2 = area->x2;
    int offsety1 = area->y1;
    int offsety2 = area->y2;
    // Copy a buffer's content to a specific area of the display
    esp_lcd_panel_draw_bitmap(panel_handle, offsetx1, offsety1, offsetx2 + 1, offsety2 + 1, color_map);
}




/**
 * @brief 触摸屏控制块
 *
 * 通知LCD内核触摸屏的点击事件
 * 
 * @param[in] drv 控制驱动
 * @param[out] data 点击区域
 * 
 */
static void example_lvgl_touch_cb(lv_indev_drv_t *drv, lv_indev_data_t *data)
{
    uint16_t touchpad_x[1] = {0};
    uint16_t touchpad_y[1] = {0};
    uint8_t touchpad_cnt = 0;

    /* Read touch controller data */
    esp_lcd_touch_read_data(drv->user_data);

    /* Get coordinates */
    bool touchpad_pressed = esp_lcd_touch_get_coordinates(drv->user_data, touchpad_x, touchpad_y, NULL, &touchpad_cnt, 1);

    if (touchpad_pressed && touchpad_cnt > 0)
    {
        data->point.x = touchpad_x[0];
        data->point.y = touchpad_y[0];
        data->state = LV_INDEV_STATE_PRESSED;
    }
    else
    {
        data->state = LV_INDEV_STATE_RELEASED;
    }
}




/**
 * @brief lvgl时钟加一
 *
 * 时钟计数增加，驱动lvgl时钟
 * 
 * @param[in] arg not used
 * 
 */
static void example_increase_lvgl_tick(void *arg)
{
    /* Tell LVGL how many milliseconds have elapsed */
    lv_tick_inc(EXAMPLE_LVGL_TICK_PERIOD_MS);
}






/**
 * @brief lvgl锁
 *
 * 加锁以保护临界资源
 * 
 * @param[in] timeout_ms 锁住LVGL锁时间
 * @return true lvgl锁成功
 */
bool example_lvgl_lock(int timeout_ms)
{
    // Convert timeout in milliseconds to FreeRTOS ticks
    // If `timeout_ms` is set to -1, the program will block until the condition is met
    const TickType_t timeout_ticks = (timeout_ms == -1) ? portMAX_DELAY : pdMS_TO_TICKS(timeout_ms);
    return xSemaphoreTakeRecursive(lvgl_mux, timeout_ticks) == pdTRUE;
}






/**
 * @brief lvgl解锁
 *
 * 解锁更新界面内容
 */
void example_lvgl_unlock(void)
{
    xSemaphoreGiveRecursive(lvgl_mux);
}






/**
 * @brief lvgl主任务
 *
 * 启动后开始进行lvgl线程运行
 * 
 * @param[in] arg not used
 */
static void example_lvgl_port_task(void *arg)
{
    ESP_LOGI(TAG, "Starting LVGL task");
    uint32_t task_delay_ms = EXAMPLE_LVGL_TASK_MAX_DELAY_MS;
    while (1) {
        // Lock the mutex due to the LVGL APIs are not thread-safe
        if (example_lvgl_lock(-1)) {
            task_delay_ms = lv_timer_handler();
            // Release the mutex
            example_lvgl_unlock();
        }
        if (task_delay_ms > EXAMPLE_LVGL_TASK_MAX_DELAY_MS) {
            task_delay_ms = EXAMPLE_LVGL_TASK_MAX_DELAY_MS;
        } else if (task_delay_ms < EXAMPLE_LVGL_TASK_MIN_DELAY_MS) {
            task_delay_ms = EXAMPLE_LVGL_TASK_MIN_DELAY_MS;
        }
        vTaskDelay(pdMS_TO_TICKS(task_delay_ms));
    }
}






/**
 * @brief i80总线初始化
 *
 * 根据IO Num初始化总线
 * 
 * @param[in] io_handle 控制句柄
 * @param[in] user_ctx 用户数据
 */
static void example_init_i80_bus(esp_lcd_panel_io_handle_t *io_handle, void *user_ctx)
{
    ESP_LOGI(TAG, "Initialize Intel 8080 bus");

    /* 创建i80总线控制句柄 */
    esp_lcd_i80_bus_handle_t i80_bus = NULL;
    esp_lcd_i80_bus_config_t bus_config = {
        .clk_src = LCD_CLK_SRC_DEFAULT,
        .dc_gpio_num = EXAMPLE_PIN_NUM_DC,
        .wr_gpio_num = EXAMPLE_PIN_NUM_PCLK,
        .data_gpio_nums = {
            EXAMPLE_PIN_NUM_DATA0,
            EXAMPLE_PIN_NUM_DATA1,
            EXAMPLE_PIN_NUM_DATA2,
            EXAMPLE_PIN_NUM_DATA3,
            EXAMPLE_PIN_NUM_DATA4,
            EXAMPLE_PIN_NUM_DATA5,
            EXAMPLE_PIN_NUM_DATA6,
            EXAMPLE_PIN_NUM_DATA7,
        },
        .bus_width = CONFIG_EXAMPLE_LCD_I80_BUS_WIDTH,
        .max_transfer_bytes = EXAMPLE_LCD_H_RES * 100 * sizeof(uint16_t),
        .dma_burst_size = EXAMPLE_DMA_BURST_SIZE,
    };
    /* 根据配置创建 i80总线控制句柄 */
    ESP_ERROR_CHECK(esp_lcd_new_i80_bus(&bus_config, &i80_bus));

    /* 配置i80总线IO引脚 */
    esp_lcd_panel_io_i80_config_t io_config = {
        .cs_gpio_num = EXAMPLE_PIN_NUM_CS,
        .pclk_hz = EXAMPLE_LCD_PIXEL_CLOCK_HZ,
        .trans_queue_depth = 10,
        .dc_levels = {
            .dc_idle_level = 0,
            .dc_cmd_level = 0,
            .dc_dummy_level = 0,
            .dc_data_level = 1,
        },
        .flags = {
            .swap_color_bytes = !LV_COLOR_16_SWAP, // Swap can be done in LvGL (default) or DMA
        },
        .on_color_trans_done = example_notify_lvgl_flush_ready,
        .user_ctx = user_ctx,
        .lcd_cmd_bits = EXAMPLE_LCD_CMD_BITS,
        .lcd_param_bits = EXAMPLE_LCD_PARAM_BITS,
    };
    ESP_ERROR_CHECK(esp_lcd_new_panel_io_i80(i80_bus, &io_config, io_handle));
}

/**
 * @brief LCD控制句柄
 *
 * 添加LCD控制句柄
 * 
 * @param[in] io_handle io句柄
 * @param[out] panel lcd句柄
 */
static void example_init_lcd_panel(esp_lcd_panel_io_handle_t io_handle, esp_lcd_panel_handle_t *panel)
{
    esp_lcd_panel_handle_t panel_handle = NULL;

    ESP_LOGI(TAG, "Install LCD driver of st7789");
    esp_lcd_panel_dev_config_t panel_config = {
        .reset_gpio_num = EXAMPLE_PIN_NUM_RST,
        .rgb_ele_order = COLOR_RGB_ELEMENT_ORDER_BGR,
        .bits_per_pixel = 16,
    };
    ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(io_handle, &panel_config, &panel_handle));

    esp_lcd_panel_reset(panel_handle);
    esp_lcd_panel_init(panel_handle);
    // Set inversion, x/y coordinate order, x/y mirror according to your LCD module spec
    // The gap is LCD panel specific, even panels with the same driver IC, can have different gap value
    esp_lcd_panel_invert_color(panel_handle, false);
    esp_lcd_panel_set_gap(panel_handle, 0, 0);

    esp_lcd_panel_mirror(panel_handle, true, false);
    *panel = panel_handle;
}

/**
 * @brief 触摸屏驱动初始化
 * 
 */
static void example_init_touch_panel(void)
{
    esp_lcd_panel_io_handle_t tp_io_handle = NULL;
    i2c_master_bus_handle_t i2c_bus_handle = NULL;  // 替换旧的esp_lcd_i2c_bus_handle_t

    ESP_LOGI(TAG, "Initialize I2C master bus");
    // 1. 初始化新版I2C主总线（替代旧的i2c_param_config+i2c_driver_install）
    i2c_master_bus_config_t i2c_bus_config = {
        .clk_source = I2C_CLK_SRC_DEFAULT,
        .i2c_port = EXAMPLE_I2C_NUM,  // I2C端口号（如I2C_NUM_0）
        .scl_io_num = EXAMPLE_I2C_SCL,
        .sda_io_num = EXAMPLE_I2C_SDA,
        .glitch_ignore_cnt = 7,  // 抗干扰配置（可选）
        .flags.enable_internal_pullup = true,
    };
    ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_config, &i2c_bus_handle));

    // 2. 配置触摸面板的I2C IO参数
    esp_lcd_panel_io_i2c_config_t tp_io_config = {
        .dev_addr = 0x38,                  // FT5x06默认地址
        .control_phase_bytes = 1,
        .dc_bit_offset = 0,
        .lcd_cmd_bits = 8,
        .lcd_param_bits = 8,
        .flags.disable_control_phase = true,
        .scl_speed_hz = 400000,            // 旧版本在此设置频率
        .on_color_trans_done = NULL,
        .user_ctx = NULL,
    };
    // 若FT5x06地址非默认（0x38），可在此修改：tp_io_config.dev_addr = 0x38;

    ESP_LOGI(TAG, "Initialize touch IO (I2C)");
    // 3. 创建LCD面板IO（传入新版I2C总线句柄）
    ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c(i2c_bus_handle, &tp_io_config, &tp_io_handle));

    // 4. 初始化触摸控制器
    esp_lcd_touch_config_t tp_cfg = {
        .x_max = EXAMPLE_LCD_V_RES,
        .y_max = EXAMPLE_LCD_H_RES,
        .rst_gpio_num = -1,  // 若无复位引脚则设为-1
        .int_gpio_num = -1,  // 若无中断引脚则设为-1
        .flags = {
            .swap_xy = 0,
            .mirror_x = 0,
            .mirror_y = 0,
        },
    };

    ESP_LOGI(TAG, "Initialize touch controller FT5X06");
    ESP_ERROR_CHECK(esp_lcd_touch_new_i2c_ft5x06(tp_io_handle, &tp_cfg, &tp));
}





/**
 * @brief 最后总的触摸屏及LCD初始化函数
 * 
 */
void initialize_display_and_touch(void)
{

/* 确定背光是否可用 */
#if EXAMPLE_PIN_NUM_BK_LIGHT >= 0
    ESP_LOGI(TAG, "Turn off LCD backlight");
    gpio_config_t bk_gpio_config = {
        .mode = GPIO_MODE_OUTPUT,
        .pin_bit_mask = 1ULL << EXAMPLE_PIN_NUM_BK_LIGHT
    };
    ESP_ERROR_CHECK(gpio_config(&bk_gpio_config));
    /* 关闭LCD背光 */
    gpio_set_level(EXAMPLE_PIN_NUM_BK_LIGHT, EXAMPLE_LCD_BK_LIGHT_OFF_LEVEL);
#endif // EXAMPLE_PIN_NUM_BK_LIGHT >= 0

    /* 初始化i80总线 */
    esp_lcd_panel_io_handle_t io_handle = NULL;
    example_init_i80_bus(&io_handle, &disp_drv);

    /* 初始化LCD控制panel */
    esp_lcd_panel_handle_t panel_handle = NULL;
    example_init_lcd_panel(io_handle, &panel_handle);

    // Stub: User can flush pre-defined pattern to the screen before we turn on the screen or backlight

    /* Since everything is initialized, let's display some content */
    ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(panel_handle, true));    

    /* Turn on the backlight! */
#if EXAMPLE_PIN_NUM_BK_LIGHT >= 0
    ESP_LOGI(TAG, "Turn on LCD backlight");
#endif // EXAMPLE_PIN_NUM_BK_LIGHT >= 0    

    /* 初始化触摸屏 */
    example_init_touch_panel();

    ESP_LOGI(TAG, "Initialize LVGL library");
    lv_init();

    // Allocate draw buffers used by LVGL
    uint32_t draw_buf_alloc_caps = 0;

#if CONFIG_EXAMPLE_LCD_I80_COLOR_IN_PSRAM
    draw_buf_alloc_caps |= MALLOC_CAP_SPIRAM;
#endif
    lv_color_t *buf1 = esp_lcd_i80_alloc_draw_buffer(io_handle, EXAMPLE_LCD_H_RES * 100 * sizeof(lv_color_t), draw_buf_alloc_caps);
    lv_color_t *buf2 = esp_lcd_i80_alloc_draw_buffer(io_handle, EXAMPLE_LCD_H_RES * 100 * sizeof(lv_color_t), draw_buf_alloc_caps);
    assert(buf1);
    assert(buf2);
    ESP_LOGI(TAG, "buf1@%p, buf2@%p", buf1, buf2);
    // Initialize LVGL draw buffers
    lv_disp_draw_buf_init(&disp_buf, buf1, buf2, EXAMPLE_LCD_H_RES * 100);

    ESP_LOGI(TAG, "Register display driver to LVGL");
    lv_disp_drv_init(&disp_drv);
    disp_drv.hor_res = EXAMPLE_LCD_H_RES;
    disp_drv.ver_res = EXAMPLE_LCD_V_RES;
    disp_drv.flush_cb = example_lvgl_flush_cb;
    disp_drv.draw_buf = &disp_buf;
    disp_drv.user_data = panel_handle;
    lv_disp_t *disp = lv_disp_drv_register(&disp_drv);

    ESP_LOGI(TAG, "Install LVGL tick timer");
    // Tick interface for LVGL (using esp_timer to generate 2ms periodic event)
    const esp_timer_create_args_t lvgl_tick_timer_args = {
        .callback = &example_increase_lvgl_tick,
        .name = "lvgl_tick"
    };
    esp_timer_handle_t lvgl_tick_timer = NULL;
    ESP_ERROR_CHECK(esp_timer_create(&lvgl_tick_timer_args, &lvgl_tick_timer));
    ESP_ERROR_CHECK(esp_timer_start_periodic(lvgl_tick_timer, EXAMPLE_LVGL_TICK_PERIOD_MS * 1000));

    /* Install touch screen driver */
    static lv_indev_drv_t indev_drv; // Input device driver (Touch)
    lv_indev_drv_init(&indev_drv);
    indev_drv.type = LV_INDEV_TYPE_POINTER;
    indev_drv.disp = disp;
    indev_drv.read_cb = example_lvgl_touch_cb;
    indev_drv.user_data = tp;

    lv_indev_drv_register(&indev_drv); 

    lvgl_mux = xSemaphoreCreateRecursiveMutex();
    assert(lvgl_mux);
    ESP_LOGI(TAG, "Create LVGL task");
    xTaskCreate(example_lvgl_port_task, "LVGL", EXAMPLE_LVGL_TASK_STACK_SIZE, NULL, EXAMPLE_LVGL_TASK_PRIORITY, NULL);

    ESP_LOGI(TAG, "Display LVGL animation");    

}